Supermodular function

Negative index metamaterial array configuration, which was constructed of copper split-ring resonators and wires mounted on interlocking sheets of fiberglass circuit board. The total array consists of 3 by 20×20 unit cells with overall dimensions of 10×100×100 mm.

Metamaterials are artificial media structured on a size scale smaller than the wavelength of external stimuli. Materials of interest exhibit properties not found in nature, such as negative index of refraction. They are cellular assemblies of multiple elements fashioned from materials including metals and plastics, arranged in periodic patterns. Metamaterials gain their properties not from their constituents, but from their exactingly-designed structures. Their precise shape, geometry, size, orientation and arrangement can affect light or sound in a manner that is unachievable with conventional materials.

The initial research in metamaterials investigated materials with negative refractive index. Negative refractive index materials appear to permit the creation of superlenses with spatial resolution below that of the wavelength. In other work, a form of 'invisibility' has been demonstrated at least over a narrow wave band with gradient-index materials. Although the first metamaterials were electromagnetic, acoustic and seismic metamaterials are also areas of active research.

Potential applications of metamaterials are diverse and include remote aerospace applications, sensor detection and infrastructure monitoring, smart solar power management, public safety, radomes, high-frequency battlefield communication and lenses for high-gain antennas, improving ultrasonic sensors, and even shielding structures from earthquakes.

Metamaterial research is interdisciplinary and involves fields including electrical engineering, electromagnetics, solid state physics, microwave and antennae engineering, optoelectronics, classic optics, material sciences, semiconductor engineering, nanoscience.

Metamaterials have become a new subdiscipline within physics and electromagnetism (especially optics and photonics).

They show promise for optical and microwave applications such as new types of beam steerers, modulators, band-pass filters, lenses, microwave couplers, and antenna systems. Furthermore, the lower density of materials means that components, devices, and systems can be lightweight and small, while at the same time enhancing system and component performance.

Metamaterials consist of periodic cellular structures.

Electromagnetic

Earlier than you determine whether or not stainless steel cookware is value shopping for, lets first talk about what stainless steel cookware is. Chrome steel is made from an alloy, or a mix of metals. Mostly, fundamental iron with chromium, nickel or some other minor metals. The chromium supplies rust protection and provides your cookware sturdiness. The nickel provides rust safety as effectively, and provides a refined look. Most effectively made chrome steel cookware has copper or aluminum added to the underside of the pan or pot. This is finished to increases the ability of the pot or pan to conduct heat.
One of the best stainless-steel cookware is the principle category, however nonetheless it is divided into several subcategories based mostly on the quality and the price range. It may be confusing to decide on the very best stainless-steel cookware out of the categories that may meet your requirements. That is where we took a step forward to explain you all the knowledge that will likely be helpful so that you can understand how to decide on the best chrome steel cookware. The best stainless-steel cookware set is manufactured from low-cost to expensive and quality constructed pots and pans.
You will find magnetic stainless steel within the layer on the outside of some high quality pieces of stainless-steel. That is to make it compatible with induction stovetops, which involve using a rapidly charging electromagnetic subject to warmth cookware. High-high quality stainless steel, like All-Clad , uses three layers of steel—the austenite layer of metal on the within, ferrite steel on the outside, and a layer of aluminum sandwiched between the two for optimum heat conductivity (metal alone doesn't conduct warmth evenly). Lesser-high quality stainless-steel is usually only one layer of austenitic chrome steel.
Aesthetically talking, chrome steel is a wise alternative when you favor to show or hang pots or pans. The clean, crisp look of all chrome steel kitchenware can remodel a mishmash of cookware into a complicated décor statement. Chrome steel kettles, such because the Cuisinart Tea Kettle will combine individual kitchenware right into a cohesive and nice entity. Take into account buying stainless-steel utensils as well. Already acquired a gorgeous stainless steel cookware assortment? The Cuisinart Chef’s Collection stainless pot rack could be the crowning glory for a kitchen, liberating up space and making these pots and pans readily accessible. Get the stainless-steel cookware of your culinary goals at Macy’s!
Arduous-anodized aluminum cookware is among the most popular forms of material, despite the fact that many people do not fairly perceive the development. Hard-anodized aluminum is plain aluminum that has been processed in a series of chemical baths charged with an electrical present. The result's a fabric that has the same superior warmth conductivity as aluminum however is non-reactive with acidic meals, similar to tomatoes, and twice as hard as chrome steel. Two drawbacks to laborious-anodized cookware are that it's not dishwasher-secure and, because it isn't magnetic, it will not work with induction range tops.
The enamel over metal method creates a piece that has the heat distribution of carbon steel and a non-reactive, low-stick surface. In the event you loved this information and you desire to acquire details about best stainless steel cookware i implore you to pay a visit to our page. Such pots are a lot lighter than most different pots of comparable dimension, are cheaper to make than chrome steel pots, and would not have the rust and reactivity problems with forged iron or carbon steel. quotation needed Enamel over metal is right for large stockpots and for different giant pans used mostly for water-primarily based cooking. Because of its mild weight and simple cleanup, enamel over metal can also be standard for cookware used while tenting. Clad aluminium or copper edit
Unique specialty cookware items served a la carte to compliment any cookware set are constructed of a sturdy Stainless Steel with a brushed exterior finish. Designed with an impression bonded, aluminum disk encapsulated base which distributes warmth quickly and evenly to permit exact temperature management. Handles are riveted for durability and efficiency. The New Specialty Cookware is compatible for all vary sorts together with induction. Along with the multi use function, another unique characteristic is bottom to top interior quantity markings in each quarts and metric measurement; and each bit comes with a tempered glass lid, oven safe to 350°F.
Whether or not you are a cooking enthusiasts, knowledgeable chef or simply cooking for your family you know the importance of getting a totally stocked kitchen. Not solely do you want the fitting elements, but you also need the right instruments to get the job performed. In any sort of fundamental cooking coaching lesson, you will be taught that chrome steel is your new finest pal when it comes to kitchen cookware. What additionally, you will study is that quality cooking tools does not normally come at a reduced price. Because of this, you will need to take good care of your cookware! Listed here are some fundamentals for stainless steel care.
To combat the uneven heating downside, most stainless steel pans are laminations of aluminum or copper on the underside to spread the warmth around, and stainless-steel contained in the pan to provide a cooking floor that's impervious to whatever you might put inside. In my experience, this chrome steel floor continues to be too sticky to fry on, and when you ever burn it you get a permanent hassle spot. But, sometimes a stainless-steel cooking surface turns out to be useful when you can't use aluminum (see below) so I keep some round. Choose one thing with a fairly thick aluminum layer on the underside.
Well, until you’re a metals professional and go examine the factory where the steel is made to see whether or not their manufacturing course of creates a pure austenite without corrosive supplies shaped, you’re not going to know for sure whether or not the craftsmanship of your stainless is of the very best quality. I think your greatest wager is to simply buy high-quality chrome steel from the start, from a brand with a reputation for good quality. But, I believe I have found out one way that you would be able to decide if the stainless cookware you already have is probably reactive. An electromagnetic metamaterial affects electromagnetic waves by having structural features smaller than the wavelength of the respective electromagnetic wave. To behave as a homogeneous material accurately described by an effective refractive index, its features must be much smaller than the wavelength.

For microwave radiation, the cells need to be on the order of several millimeters. Microwave frequency metamaterials are usually constructed as arrays of electrically conductive elements (such as loops of wire) that have suitable inductive and capacitive characteristics. These are known as split-ring resonators.

Photonic metamaterials, at the scale of nanometers, are being studied in order to manipulate light at optical frequencies. To date, subwavelength structures have shown only a few questionable results at visible wavelengths. Photonic crystals and frequency-selective surfaces such as diffraction gratings,dielectric mirrors, and optical coatings exhibit similarities to subwavelength structured metamaterials. However, these are usually considered distinct from subwavelength structures, as their features are structured for the wavelength at which they function, and thus cannot be approximated as a homogeneous material.Potter or Ceramic Artist Truman Bedell from Rexton, has interests which include ceramics, best property developers in singapore developers in singapore and scrabble. Was especially enthused after visiting Alejandro de Humboldt National Park. However, material structures such as photonic crystals are effective in the visible light spectrum. The middle of the visible spectrum has a wavelength of approximately 560 nm (for sunlight), the photonic crystal structures are generally half this size or smaller, that is <280 nm. Potter or Ceramic Artist Truman Bedell from Rexton, has interests which include ceramics, best property developers in singapore developers in singapore and scrabble. Was especially enthused after visiting Alejandro de Humboldt National Park.

Plasmonic metamaterials utilize surface plasmons, which are packets of electrical charges that collectively oscillate at the surfaces of metals at optical frequencies.

Frequency selective surfaces (FSS) can exhibit subwavelength characteristics and are known variously as Artificial magnetic conductors (AMC) or High Impedance Surfaces (HIS). FSS display inductive and capacitive characteristics that are directly related to their subwavelength structure.

Negative refractive index

A comparison of refraction in a left-handed metamaterial to that in a normal material

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Almost all materials encountered in optics, such as glass or water, have positive values for both permittivity ε and permeability µ. However, metals such as silver and gold have negative permittivity at shorter wavelengths. A material such as a surface plasmon that has either (but not both) ε or µ negative is often opaque to electromagnetic radiation. However, anisotropic materials with only negative permittivity can produce negative refraction due to chirality.

Although the optical properties of a transparent material are fully specified by the parameters εr and µr, refractive index n is often used in practice, which can be determined from $n=\pm \sqrt{{ϵ}_{\mathrm{r}}{\mu }_{\mathrm{r}}}$. All known non-metamaterial transparent materials possess positive εr and µr. By convention the positive square root is used for n.

However, some engineered metamaterials have εr < 0 and µr < 0. Because the product εrµr is positive, n is real. Under such circumstances, it is necessary to take the negative square root for n.

File:Negative refraction.ogv

The foregoing considerations are simplistic for actual materials, which must have complex-valued εr and µr. The real parts of both εr and µr do not have to be negative for a passive material to display negative refraction. Metamaterials with negative n have numerous interesting properties:

• Snell's law (n₁sinθ₁ = n₂sinθ₂), but as n₂ is negative, the rays will be refracted on the same side of the normal on entering the material.
• Cherenkov radiation points the other way.
• The time-averaged Poynting vector is antiparallel to phase velocity. However, for waves (energy) to propagate, a –µ must be paired with a –ε in order to satisfy the wave number dependence on the material parameters $k=\omega \sqrt{\mu ϵ}$.

For plane waves propagating in electromagnetic metamaterials, the electric field, magnetic field and wave vector follow a left-hand rule. This is a reversal of direction when compared to the behavior of conventional optical materials.

Negative refractive index is an important characteristic in metamaterial design and fabrication. As reverse-refraction media, these occur when both permittivity ε and permeability µ are negative. Furthermore, this condition occurs mathematically from the vector triplet E, H and k.

In ordinary materials – solid, liquid, or gas; transparent or opaque; conductor or insulator – the conventional refractive index dominates. This means that permittivity and permeability are both positive resulting in an ordinary index of refraction. However, metamaterials have the capability to exhibit a state where both permittivity and permeability are negative, resulting in an extraordinary, index of negative refraction.

Classification

Electromagnetic metamaterials divide into different classes, as follows:

Negative index

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

In negative index metamaterials (NIM), both permittivity and permeability are negative resulting in a negative index of refraction. These are also known as Double Negative Metamaterials or double negative materials (DNG). Other terms for NIMs include "left-handed media", "media with a negative refractive index", and "backward-wave media".

In optical materials, if both permittivity ε and permeability µ are positive, wave propagation travels in the forward direction. If both ε and µ are negative, a backward wave is produced. If ε and µ have different polarities, waves do not propagate. Mathematically, quadrant II and quadrant IV have coordinates (0,0) in a coordinate plane where ε is the horizontal axis, and µ is the vertical axis.

To date, materials exhibiting a negative index of refraction have only been demonstrated as artificially constructed materials.

Single negative

Single negative (SNG) metamaterials have either negative relative permittivity (εr) or negative relative permeability (µr), but not both. They act as metamaterials in combination with a different, complementary SNG, jointly acting as a DNG.

Epsilon negative media (ENG) display a negative εr while µr is positive. Many plasmas exhibit this characteristic. For example noble metals such as gold or silver will exhibit this characteristic in the infrared and visible spectrums.

Mu-negative media (MNG) display a positive εr while µr is negative. Gyrotropic or gyromagnetic materials exhibit this characteristic. A gyrotropic material is one that has been altered by the presence of a quasistatic magnetic field, enabling a magneto-optic effect. A magneto-optic effect is a phenomenon in which an electromagnetic wave propagates through such a medium. In such a material, left- and right-rotating elliptical polarizations can propagate at different speeds. When light is transmitted through a layer of magneto-optic material, the result is called the Faraday effect: the polarization plane can be rotated, forming a Faraday rotator. The results of such a reflection are known as the magneto-optic Kerr effect (not to be confused with the nonlinear Kerr effect). Two gyrotropic materials with reversed rotation directions of the two principal polarizations are called optical isomers.

Joining a slab of ENG material and slab of MNG material resulted in properties such as resonances, anomalous tunneling, transparency, and zero reflection. Like negative index materials, SNGs are innately dispersive, so their εr, µr and refraction index n, alter with changes in frequency.

Electromagnetic bandgap

47 year-old Podiatrist Hyslop from Alert Bay, has lots of hobbies and interests that include fencing, property developers in condo new launch singapore and handball. Just had a family trip to Monasteries of Haghpat and Sanahin. Electromagnetic bandgap metamaterials (EBM) control light propagation. This is accomplished either with photonic crystals (PC) or left-handed materials (LHM). PCs can prohibit light propagation altogether. Both classes can allow light to propagate in specific, designed directions and both can be designed with bandgaps at desired frequencies. The period size of EBGs is an appreciable amount of the wavelength, creating constructive and destructive interference.

PC are distinguished from sub-wavelength structures, such as tunable metamaterials, because the PC derives its properties from its bandgap characteristics. PCs are sized to match the wavelength of light, versus other metamaterials that operate as a sub-wavelength structure. Furthermore, photonic crystals function by diffracting light. In contrast, a permittivity and permeability define each metamaterial, which is derived from its sub-wavelength structure and does not use diffraction.

PCs have periodic inclusions that inhibit wave propagation due to the inclusions' destructive interference from scattering. The photonic bandgap property of PCs makes them the electromagnetic analog of electronic semi-conductor crystals.

EBGs have the goal of creating high quality, low loss, periodic, dielectric structures. An EBG affects photons in the same way semiconductor materials affect electrons. PCs are the perfect bandgap material, because they allow no light propagation. Each unit of the prescribed periodic structure acts like one atom, albeit of a much larger size.

EBGs are designed to prevent the propagation of an allocated bandwidth of frequencies, for certain arrival angles and polarizations. Various geometries and structures have been proposed to fabricate EBG's special properties. In practice it is impossible to build a flawless EBG device.

EBGs have been manufactured for frequencies ranging from a few gigahertz (GHz) up to a few terahertz (THz), radio, microwave and mid-infrared frequency regions. EBG application developments include a transmission line, woodpiles made of square dielectric bars, and several different types of low gain antennas.

Double positive medium

Double positive mediums (DPS) do occur in nature, such as naturally occurring dielectrics. Permittivity and magnetic permeability are both positive and wave propagation is in the forward direction. Artificial materials have been fabricated which combine DPS, ENG and MNG properties.

Bi-isotropic and bianisotropic

Categorizing metamaterials into double or single negative, or double positive, normally assumes that the metamaterial has independent electric and magnetic responses described by ε and µ. However in many cases, the electric field causes magnetic polarization, while the magnetic field induces electrical polarization, known as magnetoelectric coupling. Such media are denoted as bi-isotropic. Media that exhibit magnetoelectric coupling and that are also anisotropic (which is the case for many metamaterial structures), are referred to as bi-anisotropic.

Four material parameters are intrinsic to magnetoelectric coupling of bi-isotropic media. They are the electric (E) and magnetic (H) field strengths, and electric (D) and magnetic (B) flux densities. These four material parameters are ε, µ, κ and χ or permittivity, permeability, strength of chirality, and the Tellegen parameter respectively. In this type of media, the material parameters do not vary with changes along a rotated coordinate system of measurements. In this sense they are invariant or scalar.

The intrinsic magnetoelectric parameters, κ and χ, affect the phase of the wave. The effect of the chirality parameter is to split the refractive index. In isotropic media this results in wave propagation only if ε and µ have the same sign. In bi-isotropic media with χ assumed to be zero, and κ a non-zero value, different results appear. Both a backward wave and a forward wave can occur. Alternatively, two forward waves or two backward waves can occur, depending on the strength of the chirality parameter.

Chiral

Chiral metamaterials are constructed from chiral in which the effective parameter k is non-zero. This is a potential source of confusion as the metamaterial literature includes two conflicting uses of the terms left- and right-handed. The first refers to one of the two circularly polarized waves that are the propagating modes in chiral media. The second relates to the triplet of electric field, magnetic field and Poynting vector that arise in negative refractive index media, which in most cases are not chiral.

Wave propagation properties in chiral metamaterials demonstrate that negative refraction can be realized in metamaterials with a strong chirality and positive ε and μ. This is because the refractive index has distinct values for left and right, given by

$n=\sqrt{{ϵ}_r{\mu }_r}\pm \kappa$

It can be seen that a negative index will occur for one polarization if κ > Buying, selling and renting HDB and personal residential properties in Singapore are simple and transparent transactions. Although you are not required to engage a real property salesperson (generally often known as a "public listed property developers In singapore agent") to complete these property transactions, chances are you'll think about partaking one if you are not accustomed to the processes concerned.

Professional agents are readily available once you need to discover an condominium for hire in singapore In some cases, landlords will take into account you more favourably in case your agent comes to them than for those who tried to method them by yourself. You need to be careful, nevertheless, as you resolve in your agent. Ensure that the agent you are contemplating working with is registered with the IEA – Institute of Estate Brokers. Whereas it might sound a hassle to you, will probably be worth it in the end. The IEA works by an ordinary algorithm and regulations, so you'll protect yourself in opposition to probably going with a rogue agent who prices you more than they should for his or her service in finding you an residence for lease in singapore.

There isn't any deal too small. Property agents who are keen to find time for any deal even if the commission is small are the ones you want on your aspect. Additionally they present humbleness and might relate with the typical Singaporean higher. Relentlessly pursuing any deal, calling prospects even without being prompted. Even if they get rejected a hundred times, they still come again for more. These are the property brokers who will find consumers what they need eventually, and who would be the most successful in what they do. 4. Honesty and Integrity

This feature is suitable for you who need to get the tax deductions out of your PIC scheme to your property agency firm. It's endorsed that you visit the correct site for filling this tax return software. This utility must be submitted at the very least yearly to report your whole tax and tax return that you're going to receive in the current accounting 12 months. There may be an official website for this tax filling procedure. Filling this tax return software shouldn't be a tough thing to do for all business homeowners in Singapore.

A wholly owned subsidiary of SLP Worldwide, SLP Realty houses 900 associates to service SLP's fast rising portfolio of residential tasks. Real estate is a human-centric trade. Apart from offering comprehensive coaching applications for our associates, SLP Realty puts equal emphasis on creating human capabilities and creating sturdy teamwork throughout all ranges of our organisational hierarchy. Worldwide Presence At SLP International, our staff of execs is pushed to make sure our shoppers meet their enterprise and investment targets. Under is an inventory of some notable shoppers from completely different industries and markets, who've entrusted their real estate must the expertise of SLP Worldwide.

If you're looking for a real estate or Singapore property agent online, you merely need to belief your instinct. It is because you don't know which agent is sweet and which agent will not be. Carry out research on a number of brokers by looking out the internet. As soon as if you find yourself certain that a selected agent is dependable and trustworthy, you'll be able to choose to utilize his partnerise find you a house in Singapore. More often than not, a property agent is considered to be good if she or he places the contact data on his web site. This is able to imply that the agent does not thoughts you calling them and asking them any questions regarding properties in Singapore. After chatting with them you too can see them of their office after taking an appointment.

Another method by way of which you could find out whether the agent is sweet is by checking the feedback, of the shoppers, on the website. There are various individuals would publish their comments on the web site of the Singapore property agent. You can take a look at these feedback and the see whether it will be clever to hire that specific Singapore property agent. You may even get in contact with the developer immediately. Many Singapore property brokers know the developers and you may confirm the goodwill of the agent by asking the developer.. In this case, it is not necessary that either or both εr and µr be negative for backward wave propagation.

FSS based

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Frequency selective surface-based metamaterials block signals in one waveband and pass those at another waveband. They have become an alternative to fixed frequency metamaterials. They allow for optional changes of frequencies in a single medium, rather than the restrictive limitations of a fixed frequency response.

Other types

Elastic

These are a type of metamaterial that uses different parameters to achieve a negative index of refraction in materials that are not electromagnetic. Furthermore, "a new design for elastic metamaterials that can behave either as liquids or solids over a limited frequency range may enable new applications based on the control of acoustic, elastic and seismic waves." They are also called mechanical metamaterials.Potter or Ceramic Artist Truman Bedell from Rexton, has interests which include ceramics, best property developers in singapore developers in singapore and scrabble. Was especially enthused after visiting Alejandro de Humboldt National Park.

Acoustic

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. Template:Continuum mechanics

Acoustic metamaterials control, direct and manipulate sound in the form of sonic, infrasonic, or ultrasonic waves in gases, liquids and solids. As with electromagnetic waves, sonic waves can exhibit negative refraction.

Control of sound waves is mostly accomplished through the bulk modulus β, mass density ρ, and chirality. The bulk modulus and density are analogs of permittivity and permeability in electromagnetic metamaterials. Related to this is the mechanics of sound wave propagation in a lattice structure. Also materials have mass and intrinsic degrees of stiffness. Together, these form a resonant system and the mechanical (sonic) resonance may be excited by appropriate sonic frequencies (for example audible pulses).

Nonlinear

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. Metamaterials may also be fabricated which include some form of nonlinear media, whose properties change with the power of the incident wave. Nonlinear media are essential for nonlinear optics. Most optical materials have a relatively weak response, meaning that their properties change by only a small amount for large changes in the intensity of the electromagnetic field. The local electromagnetic fields of the inclusions in a nonlinear metamaterials can be much larger than the average value of the field. In addition, exotic properties such as a negative refractive index, create opportunities to tailor the phase matching conditions, which must be satisfied in any nonlinear optical structure.

Frequency bands

Terahertz

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Terahertz metamaterials interact at terahertz frequencies, usually defined as 0.1 to 10 THz. Terahertz radiation lies at the far end of the infrared band, just after the end of the microwave band. This corresponds to millimeter and submillimeterwavelengths between the 3 mm (EHF band) and 0.03 mm (long-wavelength edge of far-infrared light).

Photonic

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Photonic metamaterial interact with optical frequencies (mid-infrared). The sub-wavelength period distinguishes them from photonic band gap structures.

Tunable

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Tunable metamaterials allow arbitrary adjustments to frequency changes in the refractive index. A tunable metamaterial encompasses the development of expanding beyond the bandwidth limitations in left-handed materials by constructing various types of metamaterials.

Plasmonic

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Plasmonic metamaterials exploit surface plasmons, which are produced from the interaction of light with metal dielectrics. Under specific conditions, the incident light couples with the surface plasmons to create self-sustaining, propagating electromagnetic waves known as surface plasmon polaritons.

Applications

Metamaterials are under consideration for many applications. Metamaterial antennas are commercially available.

In 2007, one researcher stated that for metamaterial applications to be realized, energy loss must be reduced, materials must be extended into three dimensional isotropicmaterials and production techniques must be industrialized.

Antennas

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Metamaterial antennas are a class of antennas that use metamaterials to improve performance. Demonstrations have shown that metamaterials could enhance an antenna's radiated power. Materials that can attain negative permeability allow for properties such as an electrically small antenna size, high directivity and tunable operational frequency.

Absorber

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. A metamaterial absorber manipulates the loss components of metamaterials' permittivity and magnetic permeability, to absorb large amounts of electromagnetic radiation. Loss components are often noted in applications of negative refractive index (photonic metamaterials, antenna systems) or transformation optics (metamaterial cloaking, celestial mechanics), but often not utilized in these applications.

Superlens

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

A superlens uses metamaterials to achieve resolution beyond the beyond the diffraction limit. The diffraction limit is inherent in conventional optical devices or lenses.

Cloaking devices

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Metamaterials are a potential basis for a practical cloaking device. The proof of principle was demonstrated on October 19, 2006. No practical cloak exists.

Seismic protection

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. Seismic metamaterials counteract the adverse effects of seismic waves on man-made structures.

History

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. The history of metamaterials is essentially a history of developing certain types of manufactured materials, which interact at radio frequency,microwave and later, optical frequencies.

Seminal explorations of artificial materials for manipulating electromagnetic waves at the end of the 19^th century. Some of the earliest structures that may be considered metamaterials date back to Jagadish Chandra Bose who in 1898 researched substances with chiral properties. Karl Ferdinand Lindman studied wave interaction with metallic helices as artificial chiral media in the early twentieth century. In the 1950s and 1960s, artificial dielectrics were studied for lightweight microwave antennas. Microwave radar absorbers moved into the research arena in the 1980s and 1990s as applications for artificial chiral media.

Winston E. Kock developed materials that had similar characteristics to metamaterials in the late 1940s.

Materials that exhibited reversed physical characteristics were first described theoretically by Victor Veselago in 1967. He proved that substances with a negative index can transmit light. In such a material, he showed that the phase velocity would be anti-parallel to the direction of Poynting vector. This is contrary to wave propagation in naturally-occurring materials.

John Pendry was the first to identify a practical way to make a left-handed metamaterial, a material in which the right-hand rule is not followed. Such a material allows an electromagnetic wave to convey energy (have a group velocity) against its phase velocity. Pendry's idea was that metallic wires aligned along the direction of propagation could provide negative permittivity (ε < 0). Note however that natural materials (such asferroelectrics) already displayed negative permittivity; the challenge was achieving negative permeability (µ < 0). In 1999 Pendry demonstrated that a split ring (C shape) with its axis placed along the direction of wave propagation could do so. In the same paper, he showed that a periodic array of wires and ring could give rise to a negative refractive index. Pendry also proposed a related negative-permeability design, the Swiss roll.

By 2007, research experiments which involved negative refractive index had been conducted by many groups. A little over 30 years later, in the year 2000, Smith et al. reported the experimental demonstration of functioning electromagnetic metamaterials by horizontally stacking, periodically, split-ring resonators and thin wire structures. Later, a method was provided in 2002 to realize negative index metamaterials using artificial lumped-element loaded transmission lines in microstrip technology. At microwave frequencies, the first real invisibility cloak was realized in 2006. However, only a very small object was imperfectly hidden.

Theoretical models

The analogy is as follows: All materials are made of atoms, which are dipoles. These dipoles modify the light velocity by a factor n (the refractive index). The ring and wire units play the role of atomic dipoles: the wire acts as a ferroelectric atom, while the ring acts as an inductor L and the open section as a capacitor C. The ring as a whole therefore acts as an LC circuit. When the electromagnetic field passes through the ring, an induced current is created and the generated field is perpendicular to the magnetic field of the light. The magnetic resonance results in a negative permeability; the index is negative as well. (The lens is not truly flat, since the capacitance of the structure imposes a slope for the electric induction.)

Several (mathematical) material models which frequency response in DNGs. One of these is the Lorentz model. This describes electron motion in terms of a driven-damped, harmonic oscillator. The Debye relaxation model applies when the acceleration component of the Lorentz mathematical model is small compared to the other components of the equation. The Drude model applies when the restoring force component is negligible and the coupling coefficient is generally the plasma frequency. Other component distinctions call for the use of one of these models, depending on its polarity, or purpose.

Three-dimensional composites of metal/non-metallic inclusions periodically/randomly embedded in a low permittivity matrix are usually modeled by analytical methods including mixing formulas and scattering-matrix based methods. The particle is modeled by either an electric dipole parallel to the electric field or a pair of crossed electric and magnetic dipoles parallel to the electric and magnetic fields, respectively, of the applied EM wave. These dipoles are the leading terms in the multipole series. They are the only existing ones for a homogeneous sphere, whose polarizability can be easily obtained from the Mie scattering coefficients. In general, this procedure is known as the "point-dipole approximation", which is a good approximation for metamaterials consisting of composites of electrically small spheres. Merits of these methods include low calculation cost and mathematical simplicity.

Institutional networks

Duke University has initiated an umbrella organization researching metamaterials under the banner "Novel Electromagnetic Materials" and became a leading research center. The center is a part of an international team, which includes California Institute of Technology, Harvard University, UCLA, Max Planck Institute of Germany, and the FOM Institute of the Netherlands. Six other groups are connected to this organization.

MURI

The Multidisciplinary University Research Initiative (MURI) encompasses tens of Universities and a few government organizations. Participating universities include UC Berkeley, UC Los Angeles, UC San Diego, Massachusetts Institute of Technology, and Imperial College in London, UK. The sponsors are Office of Naval Research and the Defense Advanced Research Project Agency.

MURI supports research that intersects more than one traditional science and engineering discipline to accelerate both research and translation to applications. As of 2009, 69 academic institutions were expected to participate in 41 research efforts.

Metamorphose

The Virtual Institute for Artificial Electromagnetic Materials and Metamaterials ”Metamorphose VI AISBL” is an international association to promote artificial electromagnetic materials and metamaterials. It organizes scientific conferences, supports specialized journals, creates and manages research programs, provides training programs (including PhD and training programs for ndustrial partners); and technology transfer to European Industry.

See also

• Artificial dielectrics—macroscopic analogues of naturally occurring dielectrics that came into use with the radar microwave technologies developed between the 1940s and 1970s.
• Split-ring resonator—delivers strong magnetic coupling for metamaterials.
• METATOY (METAmaTerial fOr raYs)—composed of super-wavelength structures, such as small arrays of prisms and lenses and can operate over a broad band of frequencies
• Magnonics

Academic journals

• Metamaterials (journal)

Metamaterials books

• Metamaterials Handbook
• Metamaterials: Physics and Engineering Explorations

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.

External links

Educational pages on metamaterials:

• Nanophotonics group. Prof. Min Qiu. Royal Institute of Technology (KTH). Sweden.
• ETA research group. Prof. Christophe Caloz. Polytechnique Montréal.
• Metamaterials. Electromagnetics Group. George Eleftheriades. University of Toronto.
• The Engheta Group. Nader Engheta. University of Pennsylvania.
• Electromagnetic Metamaterials. Fraunhofer FHR. Germany.
• Antennas Research Group. Prof. Yang Hao. University of London.
• Inano Group. Prof. M. Saif Islam. UC Davis.
• Mediums with Negative Phase Velocity. Prof. Akhlesh Lakhtakia. Penn State University.
• Condensed Matter Theory Group. Sir John Pendry. Imperial College. London.
• Computational Nano Materials Group Viktor Podolskiy (Assoc. Prof.). UMass Lowell.
• Shvets Research Group, University of Texas at Austin – US
• David Smith's research group — Duke University — US
• Costas Soukoulis at IESL, Greece — Photonic, Phononic & MetaMaterials Group
• Srinivas Sridhar's Group Northeastern University
• Irina Veretennicoff's research group, Vrije Universiteit Brussel — Belgium
• Christophe Craeye's research group – Belgium
• Martin Wegener's Metamaterials group Universität Karlsruhe (TH) — Germany
• Georgios Zouganelis's Metamaterials Group – NIT — Japan
• Xiang Zhang's group – UC Berkeley – US
• Sergei Tretyakov's group – Helsinki University of Technology, Finland
• Gengkai Hu's group – Beijing Institute of Technology, (PRC)
• Institute of Applied Phyisical Problems – BSU – Belarus]
• Centre for Photonic Metamaterials, University of Southhampton

Internet portals:

• Scholar Google profile on metamaterials
• MetaMaterials.net Web Group
• Center for Metamaterials and Integrated Plasmonics, Duke University
• Journal "Metamaterials" published by Elsevier (homepage)
• Online articles: "Metamaterials" in ScienceDirect
• RSS feed for Metamaterials articles published in Physical Review Journals
• Virtual Institute for Artificial Electromagnetic Materials and Metamaterials ("METAMORPHOSE VI AISBL")
• European Network of Excellence "METAMORPHOSE" on Metamaterials
• SensorMetrix Formed with a specific directive to exploit the recent advances in electromagnetic metamaterials
• Metamaterials collection on IOPscience (IOP Publishing)

More articles and presentations:

• Dr. Sebastien Guenneau. Research on Metamaterials and Photonic Crystal Fibres
• UWB Tunable Delay System, Prof Christophe Caloz, Ecole Polytechnique, Montreal
• What are Metamaterials ? An index page by Dr. Stefan Linden and Prof. Dr. Martin Wegener
• Raytracing Metamaterials (demonstrations)
• Multifunctionality.
• Cloaking devices, nihility bandgap, LF magnetic enhancement, perfect radome NIT Japan
• Left-Handed Flat Lens HFSS Tutorial Electromagnetism Tutorial
• Journal of Optics A, February 2005 Special issue on Metamaterials
• Experimental Verification of a Negative Index of Refraction
• How To Make an Object Invisible
• Metamaterials hold key to cloak of invisibility