LB: Difference between revisions

Revision as of 16:15, 22 November 2013

28 year-old Painting Investments Worker Truman from Regina, usually spends time with pastimes for instance interior design, property developers in new launch ec Singapore and writing. Last month just traveled to City of the Renaissance.

In physics and fluid mechanics, a boundary layer is the layer of fluid in the immediate vicinity of a bounding surface where the effects of viscosity are significant. In the Earth's atmosphere, the planetary boundary layer is the air layer near the ground affected by diurnal heat, moisture or momentum transfer to or from the surface. On an aircraft wing the boundary layer is the part of the flow close to the wing, where viscous forces distort the surrounding non-viscous flow. See Reynolds number.

Laminar boundary layers can be loosely classified according to their structure and the circumstances under which they are created. The thin shear layer which develops on an oscillating body is an example of a Stokes boundary layer, while the Blasius boundary layer refers to the well-known similarity solution near an attached flat plate held in an oncoming unidirectional flow. When a fluid rotates and viscous forces are balanced by the Coriolis effect (rather than convective inertia), an Ekman layer forms. In the theory of heat transfer, a thermal boundary layer occurs. A surface can have multiple types of boundary layer simultaneously.

Aerodynamics

The aerodynamic boundary layer was first defined by Ludwig Prandtl in a paper presented on August 12, 1904 at the third International Congress of Mathematicians in Heidelberg, Germany. It simplifies the equations of fluid flow by dividing the flow field into two areas: one inside the boundary layer, dominated by viscosity and creating the majority of drag experienced by the boundary body; and one outside the boundary layer, where viscosity can be neglected without significant effects on the solution. This allows a closed-form solution for the flow in both areas, a significant simplification of the full Navier–Stokes equations. The majority of the heat transfer to and from a body also takes place within the boundary layer, again allowing the equations to be simplified in the flow field outside the boundary layer. The pressure distribution throughout the boundary layer in the direction normal to the surface (such as an airfoil) remains constant throughout the boundary layer, and is the same as on the surface itself.

The thickness of the velocity boundary layer is normally defined as the distance from the solid body at which the viscous flow velocity is 99% of the freestream velocity (the surface velocity of an inviscid flow). Displacement Thickness is an alternative definition stating that the boundary layer represents a deficit in mass flow compared to inviscid flow with slip at the wall. It is the distance by which the wall would have to be displaced in the inviscid case to give the same total mass flow as the viscous case. The no-slip condition requires the flow velocity at the surface of a solid object be zero and the fluid temperature be equal to the temperature of the surface. The flow velocity will then increase rapidly within the boundary layer, governed by the boundary layer equations, below.

The thermal boundary layer thickness is similarly the distance from the body at which the temperature is 99% of the temperature found from an inviscid solution. The ratio of the two thicknesses is governed by the Prandtl number. If the Prandtl number is 1, the two boundary layers are the same thickness. If the Prandtl number is greater than 1, the thermal boundary layer is thinner than the velocity boundary layer. If the Prandtl number is less than 1, which is the case for air at standard conditions, the thermal boundary layer is thicker than the velocity boundary layer.

In high-performance designs, such as gliders and commercial aircraft, much attention is paid to controlling the behavior of the boundary layer to minimize drag. Two effects have to be considered. First, the boundary layer adds to the effective thickness of the body, through the displacement thickness, hence increasing the pressure drag. Secondly, the shear forces at the surface of the wing create skin friction drag.

At high Reynolds numbers, typical of full-sized aircraft, it is desirable to have a laminar boundary layer. This results in a lower skin friction due to the characteristic velocity profile of laminar flow. However, the boundary layer inevitably thickens and becomes less stable as the flow develops along the body, and eventually becomes turbulent, the process known as boundary layer transition. One way of dealing with this problem is to suck the boundary layer away through a porous surface (see Boundary layer suction). This can reduce drag, but is usually impractical due to its mechanical complexity and the power required to move the air and dispose of it. Natural laminar flow techniques push the boundary layer transition aft by reshaping the aerofoil or fuselage so that its thickest point is more aft and less thick. This reduces the velocities in the leading part and the same Reynolds number is achieved with a greater length.

At lower Reynolds numbers, such as those seen with model aircraft, it is relatively easy to maintain laminar flow. This gives low skin friction, which is desirable. However, the same velocity profile which gives the laminar boundary layer its low skin friction also causes it to be badly affected by adverse pressure gradients. As the pressure begins to recover over the rear part of the wing chord, a laminar boundary layer will tend to separate from the surface. Such flow separation causes a large increase in the pressure drag, since it greatly increases the effective size of the wing section. In these cases, it can be advantageous to deliberately trip the boundary layer into turbulence at a point prior to the location of laminar separation, using a turbulator. The fuller velocity profile of the turbulent boundary layer allows it to sustain the adverse pressure gradient without separating. Thus, although the skin friction is increased, overall drag is decreased. This is the principle behind the dimpling on golf balls, as well as vortex generators on aircraft. Special wing sections have also been designed which tailor the pressure recovery so laminar separation is reduced or even eliminated. This represents an optimum compromise between the pressure drag from flow separation and skin friction from induced turbulence.

When using half-models in wind tunnels, a peniche is sometimes used to reduce or eliminate the effect of the boundary layer.

Naval architecture

Template:Expand section

Many of the principles that apply to aircraft also apply to ships, submarines, and offshore platforms.

For ships, unlike aircraft, one deals with incompressible flows, where change in water density is negligible (a pressure rise close to 1000kPa leads to a change of only 2–3 kg/m³). This field of fluid dynamics is called hydrodynamics. A ship engineer designs for hydrodynamics first, and for strength only later. The boundary layer development, breakdown, and separation become critical because the high viscosity of water produces high shear stresses. Another consequence of high viscosity is the slip stream effect, in which the ship moves like a spear tearing through a sponge at high velocity.

Boundary layer equations

The deduction of the boundary layer equations was one of the most important advances in fluid dynamics (Anderson, 2005). Using an order of magnitude analysis, the well-known governing Navier–Stokes equations of viscous fluid flow can be greatly simplified within the boundary layer. Notably, the characteristic of the partial differential equations (PDE) becomes parabolic, rather than the elliptical form of the full Navier–Stokes equations. This greatly simplifies the solution of the equations. By making the boundary layer approximation, the flow is divided into an inviscid portion (which is easy to solve by a number of methods) and the boundary layer, which is governed by an easier to solve PDE. The continuity and Navier–Stokes equations for a two-dimensional steady incompressible flow in Cartesian coordinates are given by

\frac{\partial u}{\partial x} + \frac{\partial υ}{\partial y} = 0

u \frac{\partial u}{\partial x} + υ \frac{\partial u}{\partial y} = - \frac{1}{ρ} \frac{\partial p}{\partial x} + ν (\frac{\partial^{2} u}{\partial x^{2}} + \frac{\partial^{2} u}{\partial y^{2}})

u \frac{\partial υ}{\partial x} + υ \frac{\partial υ}{\partial y} = - \frac{1}{ρ} \frac{\partial p}{\partial y} + ν (\frac{\partial^{2} υ}{\partial x^{2}} + \frac{\partial^{2} υ}{\partial y^{2}})

where $u$ and $υ$ are the velocity components, $ρ$ is the density, $p$ is the pressure, and $ν$ is the kinematic viscosity of the fluid at a point.

The approximation states that, for a sufficiently high Reynolds number the flow over a surface can be divided into an outer region of inviscid flow unaffected by viscosity (the majority of the flow), and a region close to the surface where viscosity is important (the boundary layer). Let $u$ and $υ$ be streamwise and transverse (wall normal) velocities respectively inside the boundary layer. Using scale analysis, it can be shown that the above equations of motion reduce within the boundary layer to become

\frac{\partial u}{\partial x} + \frac{\partial υ}{\partial y} = 0

u \frac{\partial u}{\partial x} + υ \frac{\partial u}{\partial y} = - \frac{1}{ρ} \frac{\partial p}{\partial x} + ν \frac{\partial^{2} u}{\partial y^{2}}

and if the fluid is incompressible (as liquids are under standard conditions):

\frac{1}{ρ} \frac{\partial p}{\partial y} = 0

The asymptotic analysis also shows that $υ$ , the wall normal velocity, is small compared with $u$ the streamwise velocity, and that variations in properties in the streamwise direction are generally much lower than those in the wall normal direction.

Since the static pressure $p$ is independent of $y$ , then pressure at the edge of the boundary layer is the pressure throughout the boundary layer at a given streamwise position. The external pressure may be obtained through an application of Bernoulli's equation. Let $u_{0}$ be the fluid velocity outside the boundary layer, where $u$ and $u_{0}$ are both parallel. This gives upon substituting for $p$ the following result

u \frac{\partial u}{\partial x} + υ \frac{\partial u}{\partial y} = u_{0} \frac{\partial u_{0}}{\partial x} + ν \frac{\partial^{2} u}{\partial y^{2}}

with the boundary condition

\frac{\partial u}{\partial x} + \frac{\partial v}{\partial y} = 0

For a flow in which the static pressure $p$ also does not change in the direction of the flow then

\frac{\partial p}{\partial x} = 0

so $u_{0}$ remains constant.

Therefore, the equation of motion simplifies to become

u \frac{\partial u}{\partial x} + υ \frac{\partial u}{\partial y} = ν \frac{\partial^{2} u}{\partial y^{2}}

These approximations are used in a variety of practical flow problems of scientific and engineering interest. The above analysis is for any instantaneous laminar or turbulent boundary layer, but is used mainly in laminar flow studies since the mean flow is also the instantaneous flow because there are no velocity fluctuations present.

Turbulent boundary layers

The treatment of turbulent boundary layers is far more difficult due to the time-dependent variation of the flow properties. One of the most widely used techniques in which turbulent flows are tackled is to apply Reynolds decomposition. Here the instantaneous flow properties are decomposed into a mean and fluctuating component. Applying this technique to the boundary layer equations gives the full turbulent boundary layer equations not often given in literature:

\frac{\partial \overline{u}}{\partial x} + \frac{\partial \overline{v}}{\partial y} = 0

\overline{u} \frac{\partial \overline{u}}{\partial x} + \overline{v} \frac{\partial \overline{u}}{\partial y} = - \frac{1}{ρ} \frac{\partial \overline{p}}{\partial x} + ν (\frac{\partial^{2} \overline{u}}{\partial x^{2}} + \frac{\partial^{2} \overline{u}}{\partial y^{2}}) - \frac{\partial}{\partial y} (\overline{u^{'} v^{'}}) - \frac{\partial}{\partial x} (\overline{u'^{2}})

\overline{u} \frac{\partial \overline{v}}{\partial x} + \overline{v} \frac{\partial \overline{v}}{\partial y} = - \frac{1}{ρ} \frac{\partial \overline{p}}{\partial y} + ν (\frac{\partial^{2} \overline{v}}{\partial x^{2}} + \frac{\partial^{2} \overline{v}}{\partial y^{2}}) - \frac{\partial}{\partial x} (\overline{u^{'} v^{'}}) - \frac{\partial}{\partial y} (\overline{v'^{2}})

Using the same order-of-magnitude analysis as for the instantaneous equations, these turbulent boundary layer equations generally reduce to become in their classical form:

\frac{\partial \overline{u}}{\partial x} + \frac{\partial \overline{v}}{\partial y} = 0

\overline{u} \frac{\partial \overline{u}}{\partial x} + \overline{v} \frac{\partial \overline{u}}{\partial y} = - \frac{1}{ρ} \frac{\partial \overline{p}}{\partial x} + ν \frac{\partial^{2} \overline{u}}{\partial y^{2}} - \frac{\partial}{\partial y} (\overline{u^{'} v^{'}})

\frac{\partial \overline{p}}{\partial y} = 0

The additional term $\overline{u^{'} v^{'}}$ in the turbulent boundary layer equations is known as the Reynolds shear stress and is unknown a priori. The solution of the turbulent boundary layer equations therefore necessitates the use of a turbulence model, which aims to express the Reynolds shear stress in terms of known flow variables or derivatives. The lack of accuracy and generality of such models is a major obstacle in the successful prediction of turbulent flow properties in modern fluid dynamics.

A laminar sub-layer exists in the turbulent zone; it occurs due to those fluid molecules which are still in the very proximity of the surface, where the shear stress is maximum and the velocity of fluid molecules is zero.

Heat and mass transfer

In 1928, the French engineer André Lévêque observed that convective heat transfer in a flowing fluid is affected only by the velocity values very close to the surface.^[1]^[2] For flows of large Prandtl number, the temperature/mass transition from surface to freestream temperature takes place across a very thin region close to the surface. Therefore, the most important fluid velocities are those inside this very thin region in which the change in velocity can be considered linear with normal distance from the surface. In this way, for

u (y) = u_{0} [1 - \frac{(y - h)^{2}}{h^{2}}] = u_{0} \frac{y}{h} [2 - \frac{y}{h}],

when $y \to 0$ , then

u (y) \approx 2 u_{0} \frac{y}{h} = θ y

,

where θ is the tangent of the Poiseuille parabola intersecting the wall. Although Lévêque's solution was specific to heat transfer into a Poiseuille flow, his insight helped lead other scientists to an exact solution of the thermal boundary-layer problem.^[3] Schuh observed that in a boundary-layer, u is again a linear function of y, but that in this case, the wall tangent is a function of x.^[4] He expressed this with a modified version of Lévêque's profile,

u (y) = θ (x) y

.

This results in a very good approximation, even for low $P r$ numbers, so that only liquid metals with $P r$ much less than 1 cannot be treated this way.^[3] In 1962, Kestin and Persen published a paper describing solutions for heat transfer when the thermal boundary layer is contained entirely within the momentum layer and for various wall temperature distributions.^[5] For the problem of a flat plate with a temperature jump at $x = x_{0}$ , they propose a substitution that reduces the parabolic thermal boundary-layer equation to an ordinary differential equation. The solution to this equation, the temperature at any point in the fluid, can be expressed as an incomplete gamma function.^[2] Schlichting proposed an equivalent substitution that reduces the thermal boundary-layer equation to an ordinary differential equation whose solution is the same incomplete gamma function.^[6]

Convective Transfer Constants from Boundary Layer Analysis

Paul Richard Heinrich Blasius derived an exact solution to the above laminar boundary layer equations.^[7] The thickness of the boundary layer $δ$ is a function of the Reynolds number for laminar flow.

$δ \approx \frac{5.0 * x}{\sqrt{R e}}$

$δ$ = the thickness of the boundary layer: the region of flow where the velocity is less than 99% of the far field velocity $v_{\infty}$ ; $x$ is position along the semi-infinite plate, and $R e$ is the Reynolds Number given by $ρ v_{\infty} x / μ$ ( $ρ =$ density and $μ =$ dynamic viscosity).

The Blasius solution uses boundary conditions in a dimensionless form:

$\frac{v_{x} - v_{S}}{v_{\infty} - v_{S}} = \frac{v_{x}}{v_{\infty}} = \frac{v_{y}}{v_{\infty}} = 0$ Template:Spaceat Template:Space $y = 0$

$\frac{v_{x} - v_{S}}{v_{\infty} - v_{S}} = \frac{v_{x}}{v_{\infty}} = 1$ Template:Spaceat Template:Space $y = \infty$ and $x = 0$

Note that in many cases, the no-slip boundary condition holds that $v_{S}$ , the fluid velocity at the surface of the plate equals the velocity of the plate at all locations. If the plate is not moving, then $v_{S} = 0$ . A much more complicated derivation is required if fluid slip is allowed.^[8]

In fact, the Blasius solution for laminar velocity profile in the boundary layer above a semi-infinite plate can be easily extended to describe Thermal and Concentration boundary layers for heat and mass transfer respectively. Rather than the differential x-momentum balance (equation of motion), this uses a similarly derived Energy and Mass balance:

Energy:Template:Space $v_{x} \frac{\partial T}{\partial x} + v_{y} \frac{\partial T}{\partial y} = \frac{k}{ρ C p} \frac{\partial^{2} T}{\partial y^{2}}$

Mass:Template:Space $v_{x} \frac{\partial c_{A}}{\partial x} + v_{y} \frac{\partial c_{A}}{\partial y} = D_{A B} \frac{\partial^{2} c_{A}}{\partial y^{2}}$

For the momentum balance, kinematic viscosity $ν$ can be considered to be the momentum diffusivity. In the energy balance this is replaced by thermal diffusivity $α = k / ρ C_{P}$ , and by mass diffusivity $D_{A B}$ in the mass balance. In thermal diffusivity of a substance, $k$ is its thermal conductivity, $ρ$ is its density and $C_{P}$ is its heat capacity. Subscript AB denotes diffusivity of species A diffusing into species B.

Under the assumption that $α = D_{A B} = ν$ , these equations become equivalent to the momentum balance. Thus, for Prandtl number $P r = ν / α = 1$ and Schmidt number $S c = ν / D_{A B} = 1$ the Blasius solution applies directly.

Accordingly, this derivation uses a related form of the boundary conditions, replacing $v$ with $T$ or $c_{A}$ (absolute temperature or concentration of species A). The subscript S denotes a surface condition.

$\frac{v_{x} - v_{S}}{v_{\infty} - v_{S}} = \frac{T - T_{S}}{T_{\infty} - T_{S}} = \frac{c_{A} - c_{A S}}{c_{A \infty} - c_{A S}} = 0$ Template:Spaceat Template:Space $y = 0$

$\frac{v_{x} - v_{S}}{v_{\infty} - v_{S}} = \frac{T - T_{S}}{T_{\infty} - T_{S}} = \frac{c_{A} - c_{A S}}{c_{A \infty} - c_{A S}} = 1$ Template:Spaceat Template:Space $y = \infty$ and $x = 0$

Using the streamline function Blasius obtained the following solution for the shear stress at the surface of the plate.

$τ_{0} = {(\frac{\partial v_{x}}{\partial y})}_{y = 0} = 0.332 \frac{v_{\infty}}{x} R e^{1 / 2}$

And via the boundary conditions, it is known that

$\frac{v_{x} - v_{S}}{v_{\infty} - v_{S}} = \frac{T - T_{S}}{T_{\infty} - T_{S}} = \frac{c_{A} - c_{A S}}{c_{A \infty} - c_{A S}}$

We are given the following relations for heat/mass flux out of the surface of the plate

${(\frac{\partial T}{\partial y})}_{y = 0} = 0.332 \frac{T_{\infty} - T_{S}}{x} R e^{1 / 2}$

${(\frac{\partial c_{A}}{\partial y})}_{y = 0} = 0.332 \frac{c_{A \infty} - c_{A S}}{x} R e^{1 / 2}$

So for $P r = S c = 1$

$δ = δ_{T} = δ_{c} = \frac{5.0 * x}{\sqrt{R e}}$

Where $δ_{T}, δ_{c}$ are the regions of flow where $T$ and $c_{A}$ are less than 99% of their far field values.^[9]

Because the Prandtl number of a particular fluid is not often unity, German engineer E. Polhausen who worked with Ludwig Prandtl attempted to empirically extend these equations to apply for $P r \neq 1$ . His results can be applied to $S c$ as well.^[10] He found that for Prandtl number greater than 0.6, the thermal boundary layer thickness was approximately given by:

$\frac{δ}{δ_{T}} = P r^{1 / 3}$ Template:Spaceand thereforeTemplate:Space $\frac{δ}{δ_{c}} = S c^{1 / 3}$

From this solution, it is possible to characterize the convective heat/mass transfer constants based on the region of boundary layer flow. Fourier’s law of conduction and Newton’s Law of Cooling are combined with the flux term derived above and the boundary layer thickness.

$\frac{q}{A} = - k {(\frac{\partial T}{\partial y})}_{y = 0} = h_{x} (T_{S} - T_{\infty})$

$h_{x} = 0.332 \frac{k}{x} R e_{x}^{1 / 2} P r^{1 / 3}$

This gives the local convective constant $h_{x}$ at one point on the semi-infinite plane. Integrating over the length of the plate gives an average

$h_{L} = 0.664 \frac{k}{x} R e_{L}^{1 / 2} P r^{1 / 3}$

Following the derivation with mass transfer terms ( $k$ = convective mass transfer constant, $D_{A B}$ = diffusivity of species A into species B, $S c = ν / D_{A B}$ ), the following solutions are obtained:

$k'_{x} = 0.332 \frac{D_{A B}}{x} R e_{x}^{1 / 2} S c^{1 / 3}$

$k'_{L} = 0.664 \frac{D_{A B}}{x} R e_{L}^{1 / 2} S c^{1 / 3}$

These solutions apply for laminar flow with a Prandtl/Schmidt number greater than 0.6.^[9]

Boundary layer turbine

This effect was exploited in the Tesla turbine, patented by Nikola Tesla in 1913. It is referred to as a bladeless turbine because it uses the boundary layer effect and not a fluid impinging upon the blades as in a conventional turbine. Boundary layer turbines are also known as cohesion-type turbine, bladeless turbine, and Prandtl layer turbine (after Ludwig Prandtl).

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.

20 year-old Real Estate Agent Rusty from Saint-Paul, has hobbies and interests which includes monopoly, property developers in singapore and poker. Will soon undertake a contiki trip that may include going to the Lower Valley of the Omo.

My blog: http://www.primaboinca.com/view_profile.php?userid=5889534
A.D. Polyanin and V.F. Zaitsev, Handbook of Nonlinear Partial Differential Equations, Chapman & Hall/CRC Press, Boca Raton – London, 2004. ISBN 1-58488-355-3
A.D. Polyanin, A.M. Kutepov, A.V. Vyazmin, and D.A. Kazenin, Hydrodynamics, Mass and Heat Transfer in Chemical Engineering, Taylor & Francis, London, 2002. ISBN 0-415-27237-8
Hermann Schlichting, Klaus Gersten, E. Krause, H. Jr. Oertel, C. Mayes "Boundary-Layer Theory" 8th edition Springer 2004 ISBN 3-540-66270-7
John D. Anderson, Jr., "Ludwig Prandtl's Boundary Layer", Physics Today, December 2005
20 year-old Real Estate Agent Rusty from Saint-Paul, has hobbies and interests which includes monopoly, property developers in singapore and poker. Will soon undertake a contiki trip that may include going to the Lower Valley of the Omo.

My blog: http://www.primaboinca.com/view_profile.php?userid=5889534
H. Tennekes and J. L. Lumley, "A First Course in Turbulence", The MIT Press, (1972).

External links

National Science Digital Library – Boundary Layer
Moore, Franklin K., "Displacement effect of a three-dimensional boundary layer". NACA Report 1124, 1953.
Benson, Tom, "Boundary layer". NASA Glenn Learning Technologies.
Boundary layer separation
Boundary layer equations: Exact Solutions – from EqWorld
Jones, T.V. BOUNDARY LAYER HEAT TRANSFER

↑ One of the biggest reasons investing in a Singapore new launch is an effective things is as a result of it is doable to be lent massive quantities of money at very low interest rates that you should utilize to purchase it. Then, if property values continue to go up, then you'll get a really high return on funding (ROI). Simply make sure you purchase one of the higher properties, reminiscent of the ones at Fernvale the Riverbank or any Singapore landed property Get Earnings by means of Renting

In its statement, the singapore property listing - website link, government claimed that the majority citizens buying their first residence won't be hurt by the new measures. Some concessions can even be prolonged to chose teams of consumers, similar to married couples with a minimum of one Singaporean partner who are purchasing their second property so long as they intend to promote their first residential property. Lower the LTV limit on housing loans granted by monetary establishments regulated by MAS from 70% to 60% for property purchasers who are individuals with a number of outstanding housing loans on the time of the brand new housing purchase. Singapore Property Measures - 30 August 2010 The most popular seek for the number of bedrooms in Singapore is 4, followed by 2 and three. Lush Acres EC @ Sengkang

Discover out more about real estate funding in the area, together with info on international funding incentives and property possession. Many Singaporeans have been investing in property across the causeway in recent years, attracted by comparatively low prices. However, those who need to exit their investments quickly are likely to face significant challenges when trying to sell their property – and could finally be stuck with a property they can't sell. Career improvement programmes, in-house valuation, auctions and administrative help, venture advertising and marketing, skilled talks and traisning are continuously planned for the sales associates to help them obtain better outcomes for his or her shoppers while at Knight Frank Singapore. No change Present Rules

Extending the tax exemption would help. The exemption, which may be as a lot as $2 million per family, covers individuals who negotiate a principal reduction on their existing mortgage, sell their house short (i.e., for lower than the excellent loans), or take part in a foreclosure course of. An extension of theexemption would seem like a common-sense means to assist stabilize the housing market, but the political turmoil around the fiscal-cliff negotiations means widespread sense could not win out. Home Minority Chief Nancy Pelosi (D-Calif.) believes that the mortgage relief provision will be on the table during the grand-cut price talks, in response to communications director Nadeam Elshami. Buying or promoting of blue mild bulbs is unlawful.

A vendor's stamp duty has been launched on industrial property for the primary time, at rates ranging from 5 per cent to 15 per cent. The Authorities might be trying to reassure the market that they aren't in opposition to foreigners and PRs investing in Singapore's property market. They imposed these measures because of extenuating components available in the market." The sale of new dual-key EC models will even be restricted to multi-generational households only. The models have two separate entrances, permitting grandparents, for example, to dwell separately. The vendor's stamp obligation takes effect right this moment and applies to industrial property and plots which might be offered inside three years of the date of buy. JLL named Best Performing Property Brand for second year running

The data offered is for normal info purposes only and isn't supposed to be personalised investment or monetary advice. Motley Fool Singapore contributor Stanley Lim would not personal shares in any corporations talked about. Singapore private home costs increased by 1.eight% within the fourth quarter of 2012, up from 0.6% within the earlier quarter. Resale prices of government-built HDB residences which are usually bought by Singaporeans, elevated by 2.5%, quarter on quarter, the quickest acquire in five quarters. And industrial property, prices are actually double the levels of three years ago. No withholding tax in the event you sell your property. All your local information regarding vital HDB policies, condominium launches, land growth, commercial property and more

There are various methods to go about discovering the precise property. Some local newspapers (together with the Straits Instances ) have categorised property sections and many local property brokers have websites. Now there are some specifics to consider when buying a 'new launch' rental. Intended use of the unit Every sale begins with 10 p.c low cost for finish of season sale; changes to 20 % discount storewide; follows by additional reduction of fiftyand ends with last discount of 70 % or extra. Typically there is even a warehouse sale or transferring out sale with huge mark-down of costs for stock clearance. Deborah Regulation from Expat Realtor shares her property market update, plus prime rental residences and houses at the moment available to lease Esparina EC @ Sengkang
↑ ^2.0 ^2.1 Template:Cite web
↑ ^3.0 ^3.1 Template:Cite news
↑ Template:Cite news
↑ One of the biggest reasons investing in a Singapore new launch is an effective things is as a result of it is doable to be lent massive quantities of money at very low interest rates that you should utilize to purchase it. Then, if property values continue to go up, then you'll get a really high return on funding (ROI). Simply make sure you purchase one of the higher properties, reminiscent of the ones at Fernvale the Riverbank or any Singapore landed property Get Earnings by means of Renting

In its statement, the singapore property listing - website link, government claimed that the majority citizens buying their first residence won't be hurt by the new measures. Some concessions can even be prolonged to chose teams of consumers, similar to married couples with a minimum of one Singaporean partner who are purchasing their second property so long as they intend to promote their first residential property. Lower the LTV limit on housing loans granted by monetary establishments regulated by MAS from 70% to 60% for property purchasers who are individuals with a number of outstanding housing loans on the time of the brand new housing purchase. Singapore Property Measures - 30 August 2010 The most popular seek for the number of bedrooms in Singapore is 4, followed by 2 and three. Lush Acres EC @ Sengkang

Discover out more about real estate funding in the area, together with info on international funding incentives and property possession. Many Singaporeans have been investing in property across the causeway in recent years, attracted by comparatively low prices. However, those who need to exit their investments quickly are likely to face significant challenges when trying to sell their property – and could finally be stuck with a property they can't sell. Career improvement programmes, in-house valuation, auctions and administrative help, venture advertising and marketing, skilled talks and traisning are continuously planned for the sales associates to help them obtain better outcomes for his or her shoppers while at Knight Frank Singapore. No change Present Rules

Extending the tax exemption would help. The exemption, which may be as a lot as $2 million per family, covers individuals who negotiate a principal reduction on their existing mortgage, sell their house short (i.e., for lower than the excellent loans), or take part in a foreclosure course of. An extension of theexemption would seem like a common-sense means to assist stabilize the housing market, but the political turmoil around the fiscal-cliff negotiations means widespread sense could not win out. Home Minority Chief Nancy Pelosi (D-Calif.) believes that the mortgage relief provision will be on the table during the grand-cut price talks, in response to communications director Nadeam Elshami. Buying or promoting of blue mild bulbs is unlawful.

A vendor's stamp duty has been launched on industrial property for the primary time, at rates ranging from 5 per cent to 15 per cent. The Authorities might be trying to reassure the market that they aren't in opposition to foreigners and PRs investing in Singapore's property market. They imposed these measures because of extenuating components available in the market." The sale of new dual-key EC models will even be restricted to multi-generational households only. The models have two separate entrances, permitting grandparents, for example, to dwell separately. The vendor's stamp obligation takes effect right this moment and applies to industrial property and plots which might be offered inside three years of the date of buy. JLL named Best Performing Property Brand for second year running

The data offered is for normal info purposes only and isn't supposed to be personalised investment or monetary advice. Motley Fool Singapore contributor Stanley Lim would not personal shares in any corporations talked about. Singapore private home costs increased by 1.eight% within the fourth quarter of 2012, up from 0.6% within the earlier quarter. Resale prices of government-built HDB residences which are usually bought by Singaporeans, elevated by 2.5%, quarter on quarter, the quickest acquire in five quarters. And industrial property, prices are actually double the levels of three years ago. No withholding tax in the event you sell your property. All your local information regarding vital HDB policies, condominium launches, land growth, commercial property and more

There are various methods to go about discovering the precise property. Some local newspapers (together with the Straits Instances ) have categorised property sections and many local property brokers have websites. Now there are some specifics to consider when buying a 'new launch' rental. Intended use of the unit Every sale begins with 10 p.c low cost for finish of season sale; changes to 20 % discount storewide; follows by additional reduction of fiftyand ends with last discount of 70 % or extra. Typically there is even a warehouse sale or transferring out sale with huge mark-down of costs for stock clearance. Deborah Regulation from Expat Realtor shares her property market update, plus prime rental residences and houses at the moment available to lease Esparina EC @ Sengkang
↑ 20 year-old Real Estate Agent Rusty from Saint-Paul, has hobbies and interests which includes monopoly, property developers in singapore and poker. Will soon undertake a contiki trip that may include going to the Lower Valley of the Omo.

My blog: http://www.primaboinca.com/view_profile.php?userid=5889534
↑ Blasius, H. (1908). "Grenzschichten in Flüssigkeiten mit kleiner Reibung". Z. Math. Phys. 56: 1–37. (English translation)
↑ Martin, Michael J. Blasius boundary layer solution with slip flow conditions. AIP conference proceedings 585.1 2001: 518-523. American Institute of Physics. 24 Apr 2013.
↑ ^9.0 ^9.1 Geankoplis, Christie J. Transport Processes and Separation Process Principles: (includes Unit Operations). Fourth ed. Upper Saddle River, NJ: Prentice Hall Professional Technical Reference, 2003. Print.
↑ Pohlhausen, E. (1921), Der Wärmeaustausch zwischen festen Körpern und Flüssigkeiten mit kleiner reibung und kleiner Wärmeleitung. Z. angew. Math. Mech., 1: 115–121. doi: 10.1002/zamm.19210010205

[1] One of the biggest reasons investing in a Singapore new launch is an effective things is as a result of it is doable to be lent massive quantities of money at very low interest rates that you should utilize to purchase it. Then, if property values continue to go up, then you'll get a really high return on funding (ROI). Simply make sure you purchase one of the higher properties, reminiscent of the ones at Fernvale the Riverbank or any Singapore landed property Get Earnings by means of Renting

In its statement, the singapore property listing - website link, government claimed that the majority citizens buying their first residence won't be hurt by the new measures. Some concessions can even be prolonged to chose teams of consumers, similar to married couples with a minimum of one Singaporean partner who are purchasing their second property so long as they intend to promote their first residential property. Lower the LTV limit on housing loans granted by monetary establishments regulated by MAS from 70% to 60% for property purchasers who are individuals with a number of outstanding housing loans on the time of the brand new housing purchase. Singapore Property Measures - 30 August 2010 The most popular seek for the number of bedrooms in Singapore is 4, followed by 2 and three. Lush Acres EC @ Sengkang

Discover out more about real estate funding in the area, together with info on international funding incentives and property possession. Many Singaporeans have been investing in property across the causeway in recent years, attracted by comparatively low prices. However, those who need to exit their investments quickly are likely to face significant challenges when trying to sell their property – and could finally be stuck with a property they can't sell. Career improvement programmes, in-house valuation, auctions and administrative help, venture advertising and marketing, skilled talks and traisning are continuously planned for the sales associates to help them obtain better outcomes for his or her shoppers while at Knight Frank Singapore. No change Present Rules

Extending the tax exemption would help. The exemption, which may be as a lot as $2 million per family, covers individuals who negotiate a principal reduction on their existing mortgage, sell their house short (i.e., for lower than the excellent loans), or take part in a foreclosure course of. An extension of theexemption would seem like a common-sense means to assist stabilize the housing market, but the political turmoil around the fiscal-cliff negotiations means widespread sense could not win out. Home Minority Chief Nancy Pelosi (D-Calif.) believes that the mortgage relief provision will be on the table during the grand-cut price talks, in response to communications director Nadeam Elshami. Buying or promoting of blue mild bulbs is unlawful.

A vendor's stamp duty has been launched on industrial property for the primary time, at rates ranging from 5 per cent to 15 per cent. The Authorities might be trying to reassure the market that they aren't in opposition to foreigners and PRs investing in Singapore's property market. They imposed these measures because of extenuating components available in the market." The sale of new dual-key EC models will even be restricted to multi-generational households only. The models have two separate entrances, permitting grandparents, for example, to dwell separately. The vendor's stamp obligation takes effect right this moment and applies to industrial property and plots which might be offered inside three years of the date of buy. JLL named Best Performing Property Brand for second year running

The data offered is for normal info purposes only and isn't supposed to be personalised investment or monetary advice. Motley Fool Singapore contributor Stanley Lim would not personal shares in any corporations talked about. Singapore private home costs increased by 1.eight% within the fourth quarter of 2012, up from 0.6% within the earlier quarter. Resale prices of government-built HDB residences which are usually bought by Singaporeans, elevated by 2.5%, quarter on quarter, the quickest acquire in five quarters. And industrial property, prices are actually double the levels of three years ago. No withholding tax in the event you sell your property. All your local information regarding vital HDB policies, condominium launches, land growth, commercial property and more

There are various methods to go about discovering the precise property. Some local newspapers (together with the Straits Instances ) have categorised property sections and many local property brokers have websites. Now there are some specifics to consider when buying a 'new launch' rental. Intended use of the unit Every sale begins with 10 p.c low cost for finish of season sale; changes to 20 % discount storewide; follows by additional reduction of fiftyand ends with last discount of 70 % or extra. Typically there is even a warehouse sale or transferring out sale with huge mark-down of costs for stock clearance. Deborah Regulation from Expat Realtor shares her property market update, plus prime rental residences and houses at the moment available to lease Esparina EC @ Sengkang

[McMahon-2] 2.0 ^2.1 Template:Cite web

[Martin2002-3] 3.0 ^3.1 Template:Cite news

[4] Template:Cite news

[5] One of the biggest reasons investing in a Singapore new launch is an effective things is as a result of it is doable to be lent massive quantities of money at very low interest rates that you should utilize to purchase it. Then, if property values continue to go up, then you'll get a really high return on funding (ROI). Simply make sure you purchase one of the higher properties, reminiscent of the ones at Fernvale the Riverbank or any Singapore landed property Get Earnings by means of Renting

In its statement, the singapore property listing - website link, government claimed that the majority citizens buying their first residence won't be hurt by the new measures. Some concessions can even be prolonged to chose teams of consumers, similar to married couples with a minimum of one Singaporean partner who are purchasing their second property so long as they intend to promote their first residential property. Lower the LTV limit on housing loans granted by monetary establishments regulated by MAS from 70% to 60% for property purchasers who are individuals with a number of outstanding housing loans on the time of the brand new housing purchase. Singapore Property Measures - 30 August 2010 The most popular seek for the number of bedrooms in Singapore is 4, followed by 2 and three. Lush Acres EC @ Sengkang

Discover out more about real estate funding in the area, together with info on international funding incentives and property possession. Many Singaporeans have been investing in property across the causeway in recent years, attracted by comparatively low prices. However, those who need to exit their investments quickly are likely to face significant challenges when trying to sell their property – and could finally be stuck with a property they can't sell. Career improvement programmes, in-house valuation, auctions and administrative help, venture advertising and marketing, skilled talks and traisning are continuously planned for the sales associates to help them obtain better outcomes for his or her shoppers while at Knight Frank Singapore. No change Present Rules

Extending the tax exemption would help. The exemption, which may be as a lot as $2 million per family, covers individuals who negotiate a principal reduction on their existing mortgage, sell their house short (i.e., for lower than the excellent loans), or take part in a foreclosure course of. An extension of theexemption would seem like a common-sense means to assist stabilize the housing market, but the political turmoil around the fiscal-cliff negotiations means widespread sense could not win out. Home Minority Chief Nancy Pelosi (D-Calif.) believes that the mortgage relief provision will be on the table during the grand-cut price talks, in response to communications director Nadeam Elshami. Buying or promoting of blue mild bulbs is unlawful.

A vendor's stamp duty has been launched on industrial property for the primary time, at rates ranging from 5 per cent to 15 per cent. The Authorities might be trying to reassure the market that they aren't in opposition to foreigners and PRs investing in Singapore's property market. They imposed these measures because of extenuating components available in the market." The sale of new dual-key EC models will even be restricted to multi-generational households only. The models have two separate entrances, permitting grandparents, for example, to dwell separately. The vendor's stamp obligation takes effect right this moment and applies to industrial property and plots which might be offered inside three years of the date of buy. JLL named Best Performing Property Brand for second year running

The data offered is for normal info purposes only and isn't supposed to be personalised investment or monetary advice. Motley Fool Singapore contributor Stanley Lim would not personal shares in any corporations talked about. Singapore private home costs increased by 1.eight% within the fourth quarter of 2012, up from 0.6% within the earlier quarter. Resale prices of government-built HDB residences which are usually bought by Singaporeans, elevated by 2.5%, quarter on quarter, the quickest acquire in five quarters. And industrial property, prices are actually double the levels of three years ago. No withholding tax in the event you sell your property. All your local information regarding vital HDB policies, condominium launches, land growth, commercial property and more

There are various methods to go about discovering the precise property. Some local newspapers (together with the Straits Instances ) have categorised property sections and many local property brokers have websites. Now there are some specifics to consider when buying a 'new launch' rental. Intended use of the unit Every sale begins with 10 p.c low cost for finish of season sale; changes to 20 % discount storewide; follows by additional reduction of fiftyand ends with last discount of 70 % or extra. Typically there is even a warehouse sale or transferring out sale with huge mark-down of costs for stock clearance. Deborah Regulation from Expat Realtor shares her property market update, plus prime rental residences and houses at the moment available to lease Esparina EC @ Sengkang

[6] 20 year-old Real Estate Agent Rusty from Saint-Paul, has hobbies and interests which includes monopoly, property developers in singapore and poker. Will soon undertake a contiki trip that may include going to the Lower Valley of the Omo.

My blog: http://www.primaboinca.com/view_profile.php?userid=5889534

[7] Blasius, H. (1908). "Grenzschichten in Flüssigkeiten mit kleiner Reibung". Z. Math. Phys. 56: 1–37. (English translation)

[8] Martin, Michael J. Blasius boundary layer solution with slip flow conditions. AIP conference proceedings 585.1 2001: 518-523. American Institute of Physics. 24 Apr 2013.

[citation_3-9] 9.0 ^9.1 Geankoplis, Christie J. Transport Processes and Separation Process Principles: (includes Unit Operations). Fourth ed. Upper Saddle River, NJ: Prentice Hall Professional Technical Reference, 2003. Print.

[10] Pohlhausen, E. (1921), Der Wärmeaustausch zwischen festen Körpern und Flüssigkeiten mit kleiner reibung und kleiner Wärmeleitung. Z. angew. Math. Mech., 1: 115–121. doi: 10.1002/zamm.19210010205

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

LB: Difference between revisions

en>Edupedro

Revision as of 16:15, 22 November 2013

Contents

Aerodynamics

Naval architecture

Boundary layer equations

Turbulent boundary layers

Heat and mass transfer

Convective Transfer Constants from Boundary Layer Analysis

Boundary layer turbine

See also

References

External links

Navigation menu

@@ Line 1: / Line 1: @@
-It allows you to get first hand information on how to handle hives, open frames and harvest the honey. Secondly, this condition may also occur due to some medications, for instance anti-diabetic drugs. Try aloe gel but avoid other oil-base lotions despite what you might read in other forums. It works by mimicking the proteins on account of the practical keratin discovered in it. When it's time to outrun angry military men who want to shoot you down, jump off a building, or from another height, and wait until you're about to hit the ground to use a dash. <br><br>Wave Action surf magazine initiated the idea for other publications to look out for the next top surfers by releasing an "All Grom Issue" with the article "Hot 100. Some people never completely recover from the condition and experience it on and off. Another method you could use is to join someone else's game right before they complete a quest, then you will share in the experience, but many people may (understandably) consider this unfair. ), certain materials, insect stings and bites, pollen or hay fever, infections or diseases like Lupus and Leukemia. Articles about marine pollution, reef and harbor conservation have been featured on regular sections. <br><br>2)   Environmental Changes - Moving into a new house, having a new pet, new bed, new carpet, new job in a new office. Dre and Snoop Dogg, to which both gentlemen nodded and spoke a few words of wisdom:. I was a country kid and our family loved barbecues where half the town was invited. Angioedema is like hives, only the welts are larger and form at a deeper layer in the skin. Insertions are done every 20 minutes over the period of a few hours. <br><br>Follow Concert Capture (Twitter - Facebook - Examiner Content). Some of the common symptoms of hives are inflamed and red welts, swelling, itching, burning and stinging sensation. The rush of blood can result in sensations of searing heat, along with flushing and night sweats. So it would be a very good idea to use all-organic or herbal products rather. First, if you need to take the medication for a long period of time it can actually make the condition worse and lead to more outbreaks that last longer. <br><br>The red welts are sometimes also caused due to the harmful toxins that are present in your body. ) Welts and protrusions develop on the skin because of the body. This can be quite painful and may take from six to eleven days to heal and resolve. You'll be able to buy that expensive upgrade when you're done. An allergist can test if you're allergic to substances or if your skin reacts to different possible allergens by conducting a skin test. <br><br>1: It's the usual "first step" in the treating of hives. Not simply trying to convince folks that they are something they are not. The most important part of beekeeping is to do with the hive itself because it's where the colony spends the majority of its time. Beekeeping is a structured process in order to gather honey. It appears in circular forms that are usually seen as raised welts on the skin surface.<br><br>Should you loved this post and you wish to receive more info with regards to treatment for hives - [http://www.joygoldkind.info/ http://www.joygoldkind.info], generously visit our own page.
+{{for|the [[anatomy|anatomical]] structure|Boundary layer of uterus}}
+[[Image:Boundarylayer.png|320px|thumb|right|Boundary layer visualization, showing transition from laminar to turbulent condition]]
+In [[physics]] and [[fluid mechanics]], a '''boundary layer''' is the layer of [[fluid]] in the immediate vicinity of a bounding surface where the effects of viscosity are significant. In the [[Earth's atmosphere]], the [[planetary boundary layer]] is the air layer near the ground affected by diurnal heat, moisture or momentum transfer to or from the surface.  On an [[aircraft]] [[wing]] the boundary layer is the part of the flow close to the wing, where [[viscosity|viscous]] [[force]]s distort the surrounding non-viscous flow. See [[Reynolds number]].
+Laminar boundary layers can be loosely classified according to their structure and the circumstances under which they are created. The thin shear layer which develops on an oscillating body is an example of a [[Stokes boundary layer]], while the [[Blasius boundary layer]] refers to the well-known [[Similitude (model)|similarity]] solution near an attached flat plate held in an oncoming unidirectional flow. When a fluid rotates and viscous forces are balanced by the [[Coriolis effect]] (rather than convective inertia), an [[Ekman layer]] forms. In the theory of heat transfer, a thermal boundary layer occurs. A surface can have multiple types of boundary layer simultaneously.
+==Aerodynamics==
+[[File:Laminar boundary layer scheme.svg|thumb|320px|Laminar boundary layer velocity profile]] The [[Aerodynamics|aerodynamic]] boundary layer was first defined by [[Ludwig Prandtl]] in a paper presented on August 12, 1904 at the third [[International Congress of Mathematicians]] in [[Heidelberg, Germany]]. It simplifies the equations of fluid flow by dividing the flow field into two areas: one inside the boundary layer, dominated by [[viscosity]] and creating the majority of [[drag (physics)|drag]] experienced by the boundary body; and one outside the boundary layer, where viscosity can be neglected without significant effects on the solution. This allows a closed-form solution for the flow in both areas, a significant simplification of the full [[Navier–Stokes equations]]. The majority of the [[heat transfer]] to and from a body also takes place within the boundary layer, again allowing the equations to be simplified in the flow field outside the boundary layer.  The pressure distribution throughout the boundary layer in the direction normal to the surface (such as an airfoil) remains constant throughout the boundary layer, and is the same as on the surface itself.
+The [[Boundary-layer thickness|thickness]] of the velocity boundary layer is normally defined as the distance from the solid body at which the viscous flow velocity is 99% of the freestream velocity (the surface velocity of an inviscid flow). Displacement Thickness is an alternative definition stating that the boundary layer represents a deficit in mass flow compared to inviscid flow with slip at the wall. It is the distance by which the wall would have to be displaced in the inviscid case to give the same total mass flow as the viscous case. The [[no-slip condition]] requires the flow velocity at the surface of a solid object be zero and the fluid temperature be equal to the temperature of the surface. The flow velocity will then increase rapidly within the boundary layer, governed by the boundary layer equations, below.
+The thermal boundary layer thickness is similarly the distance from the body at which the temperature is 99% of the temperature found from an inviscid solution. The ratio of the two thicknesses is governed by the [[Prandtl number]]. If the Prandtl number is 1, the two boundary layers are the same thickness.  If the Prandtl number is greater than 1, the thermal boundary layer is thinner than the velocity boundary layer. If the Prandtl number is less than 1, which is the case for air at standard conditions, the thermal boundary layer is thicker than the velocity boundary layer.
+In high-performance designs, such as [[glider aircraft|glider]]s and commercial aircraft, much attention is paid to controlling the behavior of the boundary layer to minimize drag.  Two effects have to be considered. First, the boundary layer adds to the effective thickness of the body, through the [[displacement thickness]], hence increasing the pressure drag.  Secondly, the [[simple shear|shear]] forces at the surface of the wing create [[skin friction|skin friction drag]].
+At high [[Reynolds number]]s, typical of full-sized aircraft, it is desirable to have a [[Laminar flow|laminar]] boundary layer. This results in a lower skin friction due to the characteristic velocity profile of laminar flow. However, the boundary layer inevitably thickens and becomes less stable as the flow develops along the body, and eventually becomes [[turbulent]], the process known as [[boundary layer transition]]. One way of dealing with this problem is to suck the boundary layer away through a [[porous]] surface (see [[Boundary layer suction]]). This can reduce drag, but is usually impractical due to its mechanical complexity and the power required to move the air and dispose of it. [[Natural laminar flow]] techniques push the boundary layer transition aft by reshaping the [[airfoil|aerofoil]] or [[fuselage]] so that its thickest point is more aft and less thick. This reduces the velocities in the leading part and the same Reynolds number is achieved with a greater length.
+At lower [[Reynolds number]]s, such as those seen with model aircraft, it is relatively easy to maintain laminar flow. This gives low skin friction, which is desirable. However, the same velocity profile which gives the laminar boundary layer its low skin friction also causes it to be badly affected by [[adverse pressure gradient]]s. As the pressure begins to recover over the rear part of the wing chord, a laminar boundary layer will tend to separate from the surface. Such [[flow separation]] causes a large increase in the [[pressure drag]], since it greatly increases the effective size of the wing section. In these cases, it can be advantageous to deliberately trip the boundary layer into turbulence at a point prior to the location of laminar separation, using a [[turbulator]]. The fuller velocity profile of the turbulent boundary layer allows it to sustain the adverse pressure gradient without separating. Thus, although the skin friction is increased, overall drag is decreased. This is the principle behind the dimpling on golf balls, as well as [[vortex generator]]s on aircraft. Special wing sections have also been designed which tailor the pressure recovery so laminar separation is reduced or even eliminated. This represents an optimum compromise between the pressure drag from flow separation and skin friction from induced turbulence.
+When using half-models in wind tunnels, a [[peniche (fluid dynamics)|peniche]] is sometimes used to reduce or eliminate the effect of the boundary layer.
+==Naval architecture==
+{{Expand section|date=April 2009}}
+Many of the principles that apply to aircraft also apply to ships, submarines, and offshore platforms.
+For ships, unlike aircraft, one deals with incompressible flows, where change in water density is negligible (a pressure rise close to 1000kPa leads to a change of only 2–3&nbsp;kg/m<sup>3</sup>). This field of fluid dynamics is called hydrodynamics. A ship engineer designs for hydrodynamics first, and for strength only later. The boundary layer development, breakdown, and separation become critical because the high viscosity of water produces high shear stresses. Another consequence of high viscosity is the slip stream effect, in which the ship moves like a spear tearing through a sponge at high velocity.
+==Boundary layer equations==
+The deduction of the '''boundary layer equations''' was one of the most important advances in fluid dynamics (Anderson, 2005). Using an [[order of magnitude analysis]], the well-known governing [[Navier–Stokes equations]] of [[viscous]] [[fluid]] flow can be greatly simplified within the boundary layer. Notably, the [[Characteristic polynomial#Characteristic equation|characteristic]] of the [[Partial differential equation|partial differential equations (PDE)]] becomes parabolic, rather than the elliptical form of the full Navier–Stokes equations. This greatly simplifies the solution of the equations. By making the boundary layer approximation, the flow is divided into an inviscid portion (which is easy to solve by a number of methods) and the boundary layer, which is governed by an easier to solve [[Partial differential equation|PDE]]. The continuity and Navier–Stokes equations for a two-dimensional steady [[incompressible flow]] in [[Cartesian coordinates]] are given by
+:<math> {\partial u\over\partial x}+{\partial \upsilon\over\partial y}=0 </math>
+:<math> u{\partial u \over \partial x}+\upsilon{\partial u \over \partial y}=-{1\over \rho} {\partial p \over \partial x}+{\nu}\left({\partial^2 u\over \partial x^2}+{\partial^2 u\over \partial y^2}\right) </math>
+:<math> u{\partial \upsilon \over \partial x}+\upsilon{\partial \upsilon \over \partial y}=-{1\over \rho} {\partial p \over \partial y}+{\nu}\left({\partial^2 \upsilon\over \partial x^2}+{\partial^2 \upsilon\over \partial y^2}\right) </math>
+where <math>u</math> and <math>\upsilon</math> are the velocity components, <math>\rho</math> is the density, <math>p</math> is the pressure, and <math>\nu</math> is the [[kinematic viscosity]] of the fluid at a point.
+The approximation states that, for a sufficiently high [[Reynolds number]] the flow over a surface can be divided into an outer region of inviscid flow unaffected by viscosity (the majority of the flow), and a region close to the surface where viscosity is important (the boundary layer). Let <math>u</math> and <math>\upsilon</math> be streamwise and transverse (wall normal) velocities respectively inside the boundary layer.  Using [[scale analysis (mathematics)|scale analysis]], it can be shown that the above equations of motion reduce within the boundary layer to become
+:<math> {\partial u\over\partial x}+{\partial \upsilon\over\partial y}=0 </math>
+:<math> u{\partial u \over \partial x}+\upsilon{\partial u \over \partial y}=-{1\over \rho} {\partial p \over \partial x}+{\nu}{\partial^2 u\over \partial y^2} </math>
+and if the fluid is incompressible (as liquids are under standard conditions):
+:<math> {1\over \rho} {\partial p \over \partial y}=0 </math>
+The asymptotic analysis also shows that <math>\upsilon</math>, the wall normal velocity, is small compared with <math>u</math> the streamwise velocity, and that variations in properties in the streamwise direction are generally much lower than those in the wall normal direction.
+Since the static pressure <math>p</math> is independent of <math>y</math>, then pressure at the edge of the boundary layer is the pressure throughout the boundary layer at a given streamwise position. The external pressure may be obtained through an application of [[Bernoulli's equation]].  Let <math> u_0 </math> be the fluid velocity outside the boundary layer, where <math> u </math> and <math> u_0 </math> are both parallel. This gives upon substituting for <math>p</math> the following result
+:<math> u{\partial u \over \partial x}+\upsilon{\partial u \over \partial y}=u_0{\partial u_0 \over \partial x}+{\nu}{\partial^2 u\over \partial y^2} </math>
+with the boundary condition
+:<math> {\partial u\over\partial x}+{\partial v\over\partial y}=0 </math>
+For a flow in which the static pressure <math> p </math> also does not change in the direction of the flow then
+:<math> {\partial p\over\partial x}=0 </math>
+so <math> u_0 </math> remains constant.
+Therefore, the equation of motion simplifies to become
+:<math> u{\partial u \over \partial x}+\upsilon{\partial u \over \partial y}={\nu}{\partial^2 u\over \partial y^2} </math>
+These approximations are used in a variety of practical flow problems of scientific and engineering interest. The above analysis is for any instantaneous [[laminar flow|laminar]] or [[turbulent]] boundary layer, but is used mainly in laminar flow studies since the [[mean]] flow is also the instantaneous flow because there are no velocity fluctuations present.
+==Turbulent boundary layers==
+The treatment of turbulent boundary layers is far more difficult due to the time-dependent variation of the flow properties.  One of the most widely used techniques in which turbulent flows are tackled is to apply [[Reynolds decomposition]]. Here the instantaneous flow properties are decomposed into a mean and fluctuating component. Applying this technique to the boundary layer equations gives the full turbulent boundary layer equations not often given in literature:
+:<math> {\partial \overline{u}\over\partial x}+{\partial \overline{v}\over\partial y}=0 </math>
+:<math> \overline{u}{\partial \overline{u} \over \partial x}+\overline{v}{\partial \overline{u} \over \partial y}=-{1\over \rho} {\partial \overline{p} \over \partial x}+ \nu \left({\partial^2 \overline{u}\over \partial x^2}+{\partial^2 \overline{u}\over \partial y^2}\right)-\frac{\partial}{\partial y}(\overline{u'v'})-\frac{\partial}{\partial x}(\overline{u'^2}) </math>
+:<math> \overline{u}{\partial \overline{v} \over \partial x}+\overline{v}{\partial \overline{v} \over \partial y}=-{1\over \rho} {\partial \overline{p} \over \partial y}+\nu \left({\partial^2 \overline{v}\over \partial x^2}+{\partial^2 \overline{v}\over \partial y^2}\right)-\frac{\partial}{\partial x}(\overline{u'v'})-\frac{\partial}{\partial y}(\overline{v'^2}) </math>
+Using the same order-of-magnitude analysis as for the instantaneous equations, these turbulent boundary layer equations generally reduce to become in their classical form:
+:<math> {\partial \overline{u}\over\partial x}+{\partial \overline{v}\over\partial y}=0 </math>
+:<math> \overline{u}{\partial \overline{u} \over \partial x}+\overline{v}{\partial \overline{u} \over \partial y}=-{1\over \rho} {\partial \overline{p} \over \partial x}+{\nu}{\partial^2 \overline{u}\over \partial y^2}-\frac{\partial}{\partial y}(\overline{u'v'}) </math>
+:<math> {\partial \overline{p} \over \partial y}=0 </math>
+The additional term <math>\overline{u'v'}</math> in the turbulent boundary layer equations is known as the Reynolds shear stress and is unknown [[A priori and a posteriori|a priori]]. The solution of the turbulent boundary layer equations therefore necessitates the use of a [[Turbulence modeling|turbulence model]], which aims to express the Reynolds shear stress in terms of known flow variables or derivatives. The lack of accuracy and generality of such models is a major obstacle in the successful prediction of turbulent flow properties in modern fluid dynamics.
+A laminar sub-layer exists in the turbulent zone; it occurs due to those fluid molecules which are still in the very proximity of the surface, where the shear stress is maximum and the velocity of fluid molecules is zero.
+== Heat and mass transfer ==
+In 1928, the French engineer [[André Lévêque]] observed that convective heat transfer in a flowing fluid is affected only by the velocity values very close to the surface.<ref>{{cite journal
+|author= Lévêque, A.
+|year=1928
+|title=Les lois de la transmission de chaleur par convection
+|journal=Annales des Mines ou Recueil de Mémoires sur l'Exploitation des Mines et sur les Sciences et les Arts qui s'y Rattachent, Mémoires
+|volume=XIII
+|issue=13
+|pages=201–239
+|language=French}}</ref><ref name="McMahon">{{cite web
+|title=André Lévêque p285, a review of his velocity profile approximation
+|author=Niall McMahon
+|url=http://www.computing.dcu.ie/~nmcmahon/biography/leveque/leveque_approximation.html}}</ref> For flows of large Prandtl number, the temperature/mass transition from surface to freestream temperature takes place across a very thin region close to the surface. Therefore, the most important fluid velocities are those inside this very thin region in which the change in velocity can be considered linear with normal distance from the surface. In this way, for
+:<math>u(y) = u_0 \left[ 1 - \frac{(y - h)^2}{h^2} \right] = u_0 \frac{y}{h} \left[ 2 - \frac{y}{h} \right] \;, </math>
+when <math> y \rightarrow 0</math>, then
+:<math>u(y) \approx 2 u_0 \frac{y}{h} = \theta y </math>,
+where ''θ'' is the tangent of the Poiseuille parabola intersecting the wall.
+Although Lévêque's solution was specific to heat transfer into a Poiseuille flow, his insight helped lead other scientists to an exact solution of the thermal boundary-layer problem.<ref name="Martin2002">{{cite news
+|author=Martin, H.
+|year=2002
+|title=The generalized Lévêque equation and its practical use for the prediction of heat and mass transfer rates from pressure drop
+|journal=Chemical Engineering Science
+|volume=57
+|issue=16
+|pages=3217–3223
+|doi=10.1016/S0009-2509(02)00194-X}}</ref> Schuh observed that in a boundary-layer, ''u'' is again a linear function of ''y'', but that in this case, the wall tangent is a function of ''x''.<ref>{{cite news
+|author=Schuh, H.
+|year=1953
+|title=On asymptotic solutions for the heat transfer at varying wall temperatures in a laminar boundary layer with Hartree's velocity profiles
+|journal=Jour. Aero. Sci.
+|volume=20
+|issue=2
+|pages=146–147}}</ref> He expressed this with a modified version of Lévêque's profile,
+:<math>u(y) = \theta(x) y </math>.
+This results in a very good approximation, even for low <math>Pr</math> numbers, so that only liquid metals with <math>Pr</math> much less than 1 cannot be treated this way.<ref name="Martin2002"/>
+In 1962, Kestin and Persen published a paper describing solutions for heat transfer when the thermal boundary layer is contained entirely within the momentum layer and for various wall temperature distributions.<ref>{{cite journal
+|author= Kestin, J. and Persen, L.N.
+|year=1962
+|title=The transfer of heat across a turbulent boundary layer at very high prandtl numbers
+|journal=Int. J. Heat Mass Transfer
+|volume=5
+|pages=355–371}}</ref> For the problem of a flat plate with a temperature jump at <math>x = x_0</math>, they propose a substitution that reduces the parabolic thermal boundary-layer equation to an ordinary differential equation. The solution to this equation, the temperature at any point in the fluid, can be expressed as an incomplete [[gamma function]].<ref name="McMahon"/> [[Hermann Schlichting|Schlichting]] proposed an equivalent substitution that reduces the thermal boundary-layer equation to an ordinary differential equation whose solution is the same incomplete gamma function.<ref>{{cite book
+|author=Schlichting, H.
+|year=1979
+|title=Boundary-Layer Theory
+|publisher=McGraw-Hill
+|place=New York (USA)
+|edition=7}}</ref>
+==Convective Transfer Constants from Boundary Layer Analysis==
+Paul Richard Heinrich Blasius derived an exact solution to the above [[Blasius boundary layer|laminar boundary layer]] equations.<ref>Blasius, H. (1908). "Grenzschichten in Flüssigkeiten mit kleiner Reibung". Z. Math. Phys. 56: 1–37. (English translation)</ref>  The [[Boundary-layer thickness|thickness]] of the boundary layer <math>\delta</math> is a function of the Reynolds number for laminar flow.
+<math> \delta \approx {5.0 * x \over \sqrt {Re}} </math>
+<math>\delta</math> = the thickness of the boundary layer: the region of flow where the velocity is less than 99% of the far field velocity <math>v_\infty</math>; <math>x</math> is position along the semi-infinite plate, and <math>Re</math> is the Reynolds Number given by <math>\rho v_\infty x / \mu</math> (<math>\rho =</math> density and <math>\mu =</math> dynamic viscosity).
+The Blasius solution uses boundary conditions in a dimensionless form:
+<math> {v_x - v_S \over v_\infty - v_S} = {v_x \over v_\infty} = {v_y\over v_\infty}= 0</math>{{space|5}}at{{space|5}}<math>y=0</math>
+<math> {v_x - v_S \over v_\infty - v_S} = {v_x \over v_\infty} = 1</math>{{space|5}}at{{space|5}}<math>y=\infty</math> and <math>x=0</math>
+[[File:Velocity and Temperature boundry layer similariy.png|thumb |alt=Velocity and Temperature boundary layers share functional form|Velocity Boundary Layer (Top,orange) and Temperature Boundary Layer (Bottom, green) share a functional form due to similarity in the Momentum/Energy Balances and boundary conditions.]]
+Note that in many cases, the no-slip boundary condition holds that <math>v_S</math>, the fluid velocity at the surface of the plate equals the velocity of the plate at all locations. If the plate is not moving, then <math>v_S = 0</math>. A much more complicated derivation is required if fluid slip is allowed.<ref>Martin, Michael J. Blasius boundary layer solution with slip flow conditions. AIP conference proceedings 585.1 2001: 518-523. American Institute of Physics. 24 Apr 2013.</ref>
+In fact, the Blasius solution for laminar velocity profile in the boundary layer above a semi-infinite plate can be easily extended to describe Thermal and Concentration boundary layers for heat and mass transfer respectively. Rather than the differential x-momentum balance (equation of motion), this uses a similarly derived Energy and Mass balance:
+Energy:{{space|8}} <math> v_x {\partial T \over \partial x} + v_y {\partial T \over \partial y} = {k \over \rho Cp}{\partial^2 T \over \partial y^2} </math>
+Mass:{{space|10}} <math> v_x {\partial c_A \over \partial x} + v_y {\partial c_A \over \partial y} = D_{AB}{\partial^2 c_A \over \partial y^2} </math>
+For the momentum balance, kinematic viscosity <math>\nu</math> can be considered to be the ''momentum diffusivity''. In the energy balance this is replaced by thermal diffusivity <math>\alpha = {k / \rho C_P}</math>, and by mass diffusivity <math>D_{AB}</math> in the mass balance. In thermal diffusivity of a substance, <math>k</math> is its thermal conductivity, <math>\rho</math> is its density and <math>C_P</math> is its heat capacity. Subscript AB denotes diffusivity of species A diffusing into species B.
+Under the assumption that <math>\alpha = D_{AB} = \nu</math>, these equations become equivalent to the momentum balance. Thus, for Prandtl number <math> Pr = \nu/\alpha = 1</math> and Schmidt number <math> Sc = \nu/D_{AB} = 1</math> the Blasius solution applies directly.
+Accordingly, this derivation uses a related form of the boundary conditions, replacing <math>v</math> with <math>T</math> or <math>c_A</math> (absolute temperature or concentration of species A). The subscript S denotes a surface condition.
+<math> {v_x - v_S \over v_\infty - v_S} = {T - T_S \over T_\infty - T_S} = {c_A - c_{AS} \over c_{A\infty} - c_{AS}}= 0</math>{{space|5}}at{{space|5}}<math>y=0</math>
+<math> {v_x - v_S \over v_\infty - v_S} = {T - T_S \over T_\infty - T_S} = {c_A - c_{AS} \over c_{A\infty} - c_{AS}} = 1</math>{{space|5}}at{{space|5}}<math>y=\infty</math> and <math>x=0</math>
+Using the [[Stream function|streamline function]] Blasius obtained the following solution for the shear stress at the surface of the plate.
+<math>\tau_0 = \left( {\partial v_x \over \partial y} \right) _{y=0}=0.332 {v_\infty \over x} Re^{1/2}</math>
+And via the boundary conditions, it is known that
+<math> {v_x - v_S \over v_\infty - v_S} = {T - T_S \over T_\infty - T_S} = {c_A - c_{AS} \over c_{A\infty} - c_{AS}}</math>
+We are given the following relations for heat/mass flux out of the surface of the plate
+<math>\left( {\partial T \over \partial y} \right) _{y=0}=0.332 {T_\infty - T_S \over x} Re^{1/2}</math>
+<math>\left( {\partial c_A \over \partial y} \right) _{y=0}=0.332 {c_{A\infty} - c_{AS} \over x} Re^{1/2}</math>
+So for <math>Pr=Sc=1</math>
+<math>\delta =\delta _T= \delta _c= {5.0*x\over\sqrt{Re}}</math>
+Where <math>\delta_T,\delta_c</math> are the regions of flow where <math>T</math> and <math>c_A</math> are less than 99% of their far field values.<ref name="citation 3">Geankoplis, Christie J. Transport Processes and Separation Process Principles: (includes Unit Operations). Fourth ed. Upper Saddle River, NJ: Prentice Hall Professional Technical Reference, 2003. Print.</ref>
+Because the Prandtl number of a particular fluid is not often unity, German engineer E. Polhausen who worked with [[Ludwig Prandtl]] attempted to empirically extend these equations to apply for <math>Pr\ne 1</math>. His results can be applied to <math>Sc</math> as well.<ref>Pohlhausen, E. (1921), Der Wärmeaustausch zwischen festen Körpern und Flüssigkeiten mit kleiner reibung und kleiner Wärmeleitung. Z. angew. Math. Mech., 1: 115–121. doi: 10.1002/zamm.19210010205</ref>  He found that for Prandtl number greater than 0.6, the thermal boundary layer thickness was approximately given by:
+[[File:Thermal Boundary Layer Thickness.png|thumb|alt=Prandtl number affects the thickness of the Thermal boundary layer. When the Prandtl is less than 1, the thermal layer is larger than the velocity. For Prandtl is greater than 1, the thermal is thinner than the velocity.|Plot showing the relative thickness in the Thermal boundary layer versus the Velocity boundary layer (in red) for various Prandtl Numbers. For <math>Pr=1</math>, the two are equal.]]
+<math>{\delta \over \delta_T} = Pr^{1/3}</math>{{space|10}}and therefore{{space|10}}<math>{\delta \over \delta_c} = Sc^{1/3}</math>
+From this solution, it is possible to characterize the convective heat/mass transfer constants based on the region of boundary layer flow. [[Conduction (heat)#Fourier's law|Fourier’s law of conduction]] and [[Convective heat transfer#Newton's law of cooling|Newton’s Law of Cooling]] are combined with the flux term derived above and the boundary layer thickness.
+<math>{q\over A} = -k \left({\partial T \over \partial y} \right)_{y=0} = h_x(T_S-T_\infty)</math>
+<math>h_x = 0.332{k \over x} Re^{1/2}_x Pr^{1/3}</math>
+This gives the local convective constant <math>h_x</math> at one point on the semi-infinite plane. Integrating over the length of the plate gives an average
+<math>h_L = 0.664{k \over x} Re^{1/2}_L Pr^{1/3}</math>
+Following the derivation with mass transfer terms (<math>k</math> = convective mass transfer constant, <math>D_{AB}</math> = diffusivity of species A into species B, <math>Sc = \nu / D_{AB}</math> ), the following solutions are obtained:
+<math>k'_x = 0.332{D_{AB} \over x} Re^{1/2}_x Sc^{1/3}</math>
+<math>k'_L = 0.664{D_{AB} \over x} Re^{1/2}_L Sc^{1/3}</math>
+These solutions apply for laminar flow with a Prandtl/Schmidt number greater than 0.6.<ref name="citation 3" />
+==Boundary layer turbine==
+This effect was exploited in the [[Tesla turbine]], patented by [[Nikola Tesla]] in 1913. It is referred to as a bladeless [[turbine]] because it uses the boundary layer effect and not a fluid impinging upon the blades as in a conventional turbine. Boundary layer turbines are also known as cohesion-type turbine, bladeless turbine, and Prandtl layer turbine (after [[Ludwig Prandtl]]).
+==See also==
+* [[Boundary layer separation]]
+* [[Boundary-layer thickness]]
+* [[Boundary layer suction]]
+* [[Boundary layer control]]
+* [[Coandă effect]]
+* [[Facility for Airborne Atmospheric Measurements]]
+* [[Logarithmic law of the wall]]
+* [[Planetary boundary layer]]
+* [[Shape factor (boundary layer flow)]]
+* [[Shear stress]]
+==References==
+{{Reflist}}
+* {{cite book|last=Chanson|first=H.|authorlink=Hubert Chanson|title=Applied Hydrodynamics: An Introduction to Ideal and Real Fluid Flows|url=http://espace.library.uq.edu.au/view/UQ:191112|publisher=CRC Press, Taylor & Francis Group, Leiden, The Netherlands, 478 pages|year=2009|isbn=978-0-415-49271-3}}
+* A.D. Polyanin and V.F. Zaitsev, ''Handbook of Nonlinear Partial Differential Equations'', Chapman & Hall/CRC Press, Boca Raton – London, 2004. ISBN 1-58488-355-3
+* A.D. Polyanin, A.M. Kutepov, A.V. Vyazmin, and D.A. Kazenin, ''Hydrodynamics, Mass and Heat Transfer in Chemical Engineering'', Taylor & Francis, London, 2002. ISBN 0-415-27237-8
+* Hermann Schlichting, Klaus Gersten, E. Krause, H. Jr. Oertel, C. Mayes "Boundary-Layer Theory" 8th edition Springer 2004 ISBN 3-540-66270-7
+* John D. Anderson, Jr., [http://aps.org/units/dfd/resources/upload/prandtl_vol58no12p42_48.pdf "Ludwig Prandtl's Boundary Layer"], ''Physics Today'', December 2005
+*{{cite book
+ | last = Anderson
+ | first = John
+ | year = 1992
+ | title = Fundamentals of Aerodynamics
+ | publisher = S.S.CHAND
+ | location = Toronto
+ | edition = 2nd edition
+ | pages= 711–714
+ | isbn = 0-07-001679-8
+}}
+*[[Hendrik Tennekes|H. Tennekes]] and [[John L. Lumley|J. L. Lumley]], "A First Course in Turbulence", The MIT Press, (1972).
+==External links==
+* [http://www.nsdl.arm.gov/Library/glossary.shtml#boundary_layer National Science Digital Library – Boundary Layer]
+* Moore, Franklin K., "''[http://naca.larc.nasa.gov/reports/1953/naca-report-1124/ Displacement effect of a three-dimensional boundary layer]''". NACA Report 1124, 1953.
+* Benson, Tom, "''[http://www.grc.nasa.gov/WWW/K-12/airplane/boundlay.html Boundary layer]''". NASA Glenn Learning Technologies.
+* [http://www.maths.man.ac.uk/~ruban/blsep.html Boundary layer separation]
+* [http://eqworld.ipmnet.ru/en/solutions/npde/npde-toc5.pdf ''Boundary layer equations: Exact Solutions''] – from EqWorld
+* Jones, T.V. [http://www.thermopedia.com/content/596/ ''BOUNDARY LAYER HEAT TRANSFER'']
+{{DEFAULTSORT:Boundary Layer}}
+[[Category:Boundary layers| ]]
+[[Category:Aircraft wing design]]
+[[Category:Heat transfer]]

LB: Difference between revisions

en>Edupedro

Revision as of 16:15, 22 November 2013

Aerodynamics

Naval architecture

Boundary layer equations

Turbulent boundary layers

Heat and mass transfer

Convective Transfer Constants from Boundary Layer Analysis

Boundary layer turbine

See also

References

External links

Navigation menu

Search