Copper cable certification

Wind engineering analyzes effects of wind in the natural and the built environment and studies the possible damage, inconvenience or benefits which may result from wind. In the field of structural engineering it includes strong winds, which may cause discomfort, as well as extreme winds, such as in a tornado, hurricane or heavy storm, which may cause widespread destruction. In the fields of wind energy and air pollution it also includes low and moderate winds as these are relevant to electricity production resp. dispersion of contaminants.

Wind engineering draws upon meteorology, fluid dynamics, mechanics, geographic information systems and a number of specialist engineering disciplines including aerodynamics, and structural dynamics. The tools used include atmospheric models, atmospheric boundary layer wind tunnels, open jet facilities and computational fluid dynamics models.

Wind engineering involves, among other topics:

• Wind impact on structures (buildings, bridges, towers).
• Wind comfort near buildings.
• Effects of wind on the ventilation system in a building.
• Wind climate for wind energy.
• Air pollution near buildings.

Wind engineering may be considered by structural engineers to be closely related to earthquake engineering and explosion protection.

History

Wind Engineering as a separate discipline can be traced to the UK in the 1960s, when informal meetings were held at the National Physical Laboratory, the Building Research Establishment and elsewhere.

Wind loads on buildings

The design of buildings must account for wind loads, and these are affected by wind shear. For engineering purposes, a power law wind speed profile may be defined as follows:

$v_z=v_g\cdot {\left(\frac{z}{z_g}\right)}^{\frac{1}{\alpha }},0<z<z_g$

where:

$v_z$ = speed of the wind at height $z$

$v_g$ = gradient wind at gradient height $z_g$

$\alpha$ = exponential coefficient

Typically, buildings are designed to resist a strong wind with a very long return period, such as 50 years or more. The design wind speed is determined from historical records using extreme value theory to predict future extreme wind speeds.

Wind comfort

The advent of high rise tower blocks led to concerns regarding the wind nuisance caused by these buildings to pedestrians in their vicinity.

A number of wind comfort and wind danger criteria were developed from 1971, based on different pedestrian activities such as:

• Sitting for a long period of time
• Sitting for a short period of time
• Strolling
• Walking fast

Other criteria classified a wind environment as completely unacceptable or dangerous.

Building geometries consisting of one and two rectangular buildings have a number of well-known effects:

• Corner streams, also known as corner jets, around the corners of buildings
• Through-flow, also known as a passage jet, in any passage through a building or small gap between two buildings due to pressure short-circuiting
• Vortex shedding in the wake of buildings

For more complex geometries, pedestrian wind comfort studies are required. These can use an appropriately scaled model in a boundary layer wind tunnel, or more recently there has been increased use of Computational Fluid Dynamics (CFD) techniques. The pedestrian level wind speeds for a given exceedance probability are calculated to allow for regional wind speeds statistics.

The vertical wind profile used in these studies varies according to the terrain in the vicinity of the buildings (which is may differ by wind direction), and is often grouped in categories such as:

• Exposed open terrain with few or no obstructions and water surfaces at serviceability wind speeds.
• Water surfaces, open terrain, grassland with few, well-scattered obstructions having heights generally from 1.5 m to 10m.
• Terrain with numerous closely spaced obstructions 3 m to 5 m high, such as areas of suburban housing.
• Terrain with numerous large, high (10 m to 30 m high) and closely spaced obstructions, such as large city centres and well-developed industrial complexes.

Wind turbines

Wind turbines are affected by wind shear. Vertical wind-speed profiles result in different wind speeds at the blades nearest to the ground level compared to those at the top of blade travel, and this in turn affects the turbine operation. The wind gradient can create a large bending moment in the shaft of a two bladed turbine when the blades are vertical. The reduced wind gradient over water means shorter and less expensive wind turbine towers can be used in shallow seas.

For wind turbine engineering, wind speed variation with height is often approximated using a power law:

$v_w(h)=v_{ref}\cdot {\left(\frac{h}{h_{ref}}\right)}^a$

where:

$v_w(h)$ = velocity of the wind at height $h$ [m/s]

$v_{ref}$ = velocity of the wind at some reference height $h_{ref}$ [m]

$a$ = Hellman exponent (aka power law exponent or shear exponent) (~= 1/7 in neutral flow, but can be >1)

Significance

The knowledge of wind engineering is used to analyze and design all high rise buildings, cable suspension bridges and cable-stayed bridges, electricity transmission towers and telecommunication towers and all other types of towers and chimneys. The wind load is the dominant load in the analysis of many tall buildings. So wind engineering is essential for the analysis and design of tall buildings. Again, wind load is a dominant load in the analysis and design of all long-span cable bridges.

See also

• Hurricane engineering
• Wind tunnel testing
• Vibration control
• John Twidell

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.

External links

• International Association for Wind Engineering
• American Association of Wind Engineering
• UK Wind Engineering Society
• World Wind Energy Association