|
|
| Line 1: |
Line 1: |
| [[Image:Bauma 2007 ZF Drehmomentwandler.jpg|thumb|[[ZF Friedrichshafen|ZF]] torque converter cut-away]]
| | High there, I am Adrianne and I totally absolutely love that name. I am a people manager only soon I'll be alone. Gardening is what I do regular. Guam has always been my house. See what's new on my website here: http://circuspartypanama.com<br><br>Also visit my blog post: [http://circuspartypanama.com clash of clans hack cydia] |
| [[Image:torque-converter-cutbox-model.jpg|thumb|A cut-away model of a torque converter]]
| |
| In modern usage, a '''torque converter''' is generally a type of [[fluid coupling]] (but also being able to multiply torque) that is used to transfer rotating power from a [[Wiktionary:prime mover|prime mover]], such as an [[internal combustion engine]] or [[electric motor]], to a rotating driven load. The torque converter normally takes the place of a mechanical [[clutch]] in a vehicle with an automatic transmission, allowing the load to be separated from the power source. It is usually located between the engine's [[flexplate]] and the transmission.
| |
| | |
| The key characteristic of a torque converter is its ability to multiply torque when there is a substantial difference between input and output rotational speed, thus providing the equivalent of a [[transmission (mechanics)|reduction gear]]. Some of these devices are also equipped with a temporary locking mechanism which rigidly binds the engine to the transmission when their speeds are nearly equal, to avoid slippage and a resulting loss of efficiency.
| |
| | |
| By far the most common form of torque converter in automobile transmissions is the device described here. However, in the 1920s there was also the pendulum-based [[Constantinesco torque converter]]. There are also mechanical designs for [[continuously variable transmission]]s and these also have the ability to multiply torque, e.g. the [[Variomatic]] with expanding pulleys and a belt drive.
| |
| | |
| ==Usage==
| |
| * [[Automatic transmission]]s on [[automobile]]s, such as cars, buses, and on/off highway trucks.
| |
| * [[Forwarder]]s and other heavy duty vehicles.
| |
| * [[Marine (ocean)|Marine]] propulsion systems.
| |
| * Industrial power transmission such as [[conveyor]] drives, almost all modern forklifts, [[winches]], [[drilling rig]]s, [[construction equipment]], and [[railway locomotive]]s.
| |
| | |
| ==Function==
| |
| ===Torque converter elements===
| |
| A [[fluid coupling]] is a two element drive that is incapable of multiplying torque, while a torque converter has at least one extra element—the stator—which alters the drive's characteristics during periods of high slippage, producing an increase in output torque.
| |
| | |
| In a torque converter there are at least three rotating elements: the impeller, which is mechanically driven by the [[Wiktionary:prime mover|prime mover]]; the turbine, which drives the [[Structural load|load]]; and the stator, which is interposed between the impeller and turbine so that it can alter oil flow returning from the turbine to the impeller. The classic torque converter design dictates that the stator be prevented from rotating under any condition, hence the term ''stator''. In practice, however, the stator is mounted on an [[overrunning clutch]], which prevents the stator from counter-rotating with respect to the prime mover but allows forward rotation.
| |
| | |
| Modifications to the basic three element design have been periodically incorporated, especially in applications where higher than normal torque multiplication is required. Most commonly, these have taken the form of multiple turbines and stators, each set being designed to produce differing amounts of torque multiplication. For example, the [[Buick]] [[Dynaflow]] automatic transmission was a non-shifting design and, under normal conditions, relied solely upon the converter to multiply torque. The [[Dynaflow]] used a five element converter to produce the wide range of torque multiplication needed to propel a heavy vehicle.
| |
| | |
| Although not strictly a part of classic torque converter design, many automotive converters include a [[lock-up clutch]] to improve cruising power transmission efficiency and reduce heat. The application of the clutch locks the turbine to the impeller, causing all power transmission to be mechanical, thus eliminating losses associated with fluid drive.
| |
| | |
| ===Operational phases===
| |
| A torque converter has three stages of operation:
| |
| | |
| *'''Stall'''. The prime mover is applying power to the impeller but the turbine cannot rotate. For example, in an automobile, this stage of operation would occur when the driver has placed the [[Transmission (mechanics)|transmission]] in gear but is preventing the vehicle from moving by continuing to apply the [[brake]]s. At stall, the torque converter can produce maximum torque multiplication if sufficient input power is applied (the resulting multiplication is called the ''stall ratio''). The stall phase actually lasts for a brief period when the load (e.g., vehicle) initially starts to move, as there will be a very large difference between pump and turbine speed.
| |
| | |
| *'''Acceleration'''. The load is accelerating but there still is a relatively large difference between impeller and turbine speed. Under this condition, the converter will produce torque multiplication that is less than what could be achieved under stall conditions. The amount of multiplication will depend upon the actual difference between pump and turbine speed, as well as various other design factors.
| |
| | |
| *'''Coupling'''. The turbine has reached approximately 90 percent of the speed of the impeller. Torque multiplication has essentially ceased and the torque converter is behaving in a manner similar to a simple fluid coupling. In modern [[automotive]] applications, it is usually at this stage of operation where the lock-up clutch is applied, a procedure that tends to improve [[fuel efficiency]].
| |
| | |
| The key to the torque converter's ability to multiply torque lies in the stator. In the classic [[fluid coupling]] design, periods of high slippage cause the fluid flow returning from the turbine to the impeller to oppose the direction of impeller rotation, leading to a significant loss of efficiency and the generation of considerable waste heat. Under the same condition in a torque converter, the returning fluid will be redirected by the stator so that it aids the rotation of the impeller, instead of impeding it. The result is that much of the energy in the returning fluid is recovered and added to the energy being applied to the impeller by the prime mover. This action causes a substantial increase in the mass of fluid being directed to the turbine, producing an increase in output torque. Since the returning fluid is initially traveling in a direction opposite to impeller rotation, the stator will likewise attempt to counter-rotate as it forces the fluid to change direction, an effect that is prevented by the [[overrunning clutch|one-way stator clutch]].
| |
| | |
| Unlike the radially straight blades used in a plain fluid coupling, a torque converter's turbine and stator use angled and curved blades. The blade shape of the stator is what alters the path of the fluid, forcing it to coincide with the impeller rotation. The matching curve of the turbine blades helps to correctly direct the returning fluid to the stator so the latter can do its job. The shape of the blades is important as minor variations can result in significant changes to the converter's performance.
| |
| | |
| During the stall and acceleration phases, in which torque multiplication occurs, the stator remains stationary due to the action of its [[overrunning clutch|one-way clutch]]. However, as the torque converter approaches the coupling phase, the energy and volume of the fluid returning from the turbine will gradually decrease, causing pressure on the stator to likewise decrease. Once in the coupling phase, the returning fluid will reverse direction and now rotate in the direction of the impeller and turbine, an effect which will attempt to forward-rotate the stator. At this point, the stator clutch will release and the impeller, turbine and stator will all (more or less) turn as a unit.
| |
| | |
| Unavoidably, some of the fluid's [[kinetic energy]] will be lost due to friction and turbulence, causing the converter to generate waste heat (dissipated in many applications by water cooling). This effect, often referred to as pumping loss, will be most pronounced at or near stall conditions. In modern designs, the blade geometry minimizes oil velocity at low impeller speeds, which allows the turbine to be stalled for long periods with little danger of overheating.
| |
| | |
| ===Efficiency and torque multiplication===
| |
| A torque converter cannot achieve 100 percent coupling efficiency. The classic three element torque converter has an efficiency curve that resembles ∩: zero efficiency at stall, generally increasing efficiency during the acceleration phase and low efficiency in the coupling phase. The loss of efficiency as the converter enters the coupling phase is a result of the turbulence and fluid flow interference generated by the stator, and as previously mentioned, is commonly overcome by mounting the stator on a one-way clutch.
| |
| | |
| Even with the benefit of the one-way stator clutch, a converter cannot achieve the same level of efficiency in the coupling phase as an equivalently sized fluid coupling. Some loss is due to the presence of the stator (even though rotating as part of the assembly), as it always generates some power-absorbing turbulence. Most of the loss, however, is caused by the curved and angled turbine blades, which do not absorb kinetic energy from the fluid mass as well as radially straight blades. Since the turbine blade geometry is a crucial factor in the converter's ability to multiply torque, trade-offs between torque multiplication and coupling efficiency are inevitable. In automotive applications, where steady improvements in fuel economy have been mandated by market forces and government edict, the nearly universal use of a lock-up clutch has helped to eliminate the converter from the efficiency equation during cruising operation.
| |
|
| |
| The maximum amount of torque multiplication produced by a converter is highly dependent on the size and geometry of the turbine and stator blades, and is generated only when the converter is at or near the stall phase of operation. Typical [[stall torque]] multiplication ratios range from 1.8:1 to 2.5:1 for most automotive applications (although multi-element designs as used in the [[Buick]] [[Dynaflow]] and [[Chevrolet]] [[Turboglide]] could produce more). Specialized converters designed for industrial, rail, or heavy marine power transmission systems are capable of as much as 5.0:1 multiplication. Generally speaking, there is a trade-off between maximum torque multiplication and efficiency—high stall ratio converters tend to be relatively inefficient below the coupling speed, whereas low stall ratio converters tend to provide less possible torque multiplication.
| |
| | |
| While torque multiplication increases the torque delivered to the turbine output shaft, it also increases the slippage within the converter, raising the temperature of the fluid and reducing overall efficiency. For this reason, the characteristics of the torque converter must be carefully matched to the [[torque curve]] of the power source and the intended application. Changing the blade geometry of the stator and/or turbine will change the torque-stall characteristics, as well as the overall efficiency of the unit. For example, [[drag racing]] automatic transmissions often use converters modified to produce high stall speeds to improve off-the-line torque, and to get into the power band of the engine more quickly. Highway vehicles generally use lower stall torque converters to limit heat production, and provide a more firm feeling to the vehicle's characteristics.
| |
| | |
| A design feature once found in some [[General Motors]] automatic transmissions was the variable-pitch stator, in which the blades' [[angle of attack]] could be varied in response to changes in engine speed and load. The effect of this was to vary the amount of torque multiplication produced by the converter. At the normal angle of attack, the stator caused the converter to produce a moderate amount of multiplication but with a higher level of efficiency. If the driver abruptly opened the throttle, a valve would switch the stator pitch to a different angle of attack, increasing torque multiplication at the expense of efficiency.
| |
| | |
| Some torque converters use multiple stators and/or multiple turbines to provide a wider range of torque multiplication. Such multiple-element converters are more common in industrial environments than in automotive transmissions, but automotive applications such as [[Buick]]'s [[Dynaflow|Triple Turbine Dynaflow]] and [[Chevrolet]]'s [[Turboglide]] also existed. The Buick Dyna flow utilized the torque-multiplying characteristics of its planetary gear set in conjunction with the torque converter for low gear and bypassed the first turbine, using only the second turbine as vehicle speed increased. The unavoidable trade-off with this arrangement was low efficiency and eventually these transmissions were discontinued in favor of the more efficient three speed units with a conventional three element torque converter.
| |
| | |
| ===Lock-up torque converters===
| |
| As described above, impelling losses within the torque converter reduce efficiency and generate waste heat. In modern automotive applications, this problem is commonly avoided by use of a lock-up clutch that physically links the impeller and turbine, effectively changing the converter into a purely mechanical coupling. The result is no slippage, and virtually no power loss.
| |
| | |
| The first automotive application of the lock-up principle was [[Packard]]'s [[Ultramatic]] transmission, introduced in 1949, which locked up the converter at cruising speeds, unlocking when the [[throttle]] was floored for quick acceleration or as the vehicle slowed down. This feature was also present in some [[Borg-Warner]] transmissions produced during the 1950s. It fell out of favor in subsequent years due to its extra complexity and cost. In the late 1970s lock-up clutches started to reappear in response to demands for improved fuel economy, and are now nearly universal in automotive applications.
| |
| | |
| ===Capacity and failure modes===
| |
| As with a basic fluid coupling the theoretical torque capacity of a converter is proportional to <math>r\,N^2D^5</math>, where <math>r</math> is the mass density of the fluid (kg/m³), <math>N</math> is the impeller speed ([[rpm]]), and <math>D</math> is the diameter(m).<ref name="Bosch, Torque converter" >{{cite book
| |
| |title=Hydrodynamic couplings and converters
| |
| |series=Automotive Handbook
| |
| |publisher=[[Robert Bosch]]
| |
| |edition=3rd
| |
| |pages=539
| |
| |isbn=0-8376-0330-7
| |
| |ref=Bosch Automotive Handbook, 3rd ed
| |
| }}</ref> In practice, the maximum torque capacity is limited by the mechanical characteristics of the materials used in the converter's components, as well as the ability of the converter to dissipate heat (often through water cooling). As an aid to strength, reliability and economy of production, most automotive converter housings are of welded construction. Industrial units are usually assembled with bolted housings, a design feature that eases the process of inspection and repair, but adds to the cost of producing the converter.
| |
| | |
| In high performance, racing and heavy duty commercial converters, the pump and turbine may be further strengthened by a process called [[brazing#Furnace brazing|furnace brazing]], in which molten brass is drawn into seams and joints to produce a stronger bond between the blades, hubs and annular ring(s). Because the furnace brazing process creates a small radius at the point where a blade meets with a hub or annular ring, a theoretical decrease in turbulence will occur, resulting in a corresponding increase in efficiency.
| |
| | |
| Overloading a converter can result in several failure modes, some of them potentially dangerous in nature:
| |
| | |
| *'''Overheating''': Continuous high levels of slippage may overwhelm the converter's ability to dissipate heat, resulting in damage to the [[elastomer]] [[seal (mechanical)|seal]]s that retain fluid inside the converter. This will cause the unit to leak and eventually stop functioning due to lack of fluid.
| |
| *'''Stator clutch seizure''': The inner and outer elements of the [[overrunning clutch|one-way stator clutch]] become permanently locked together, thus preventing the stator from rotating during the coupling phase. Most often, seizure is precipitated by severe loading and subsequent distortion of the clutch components. Eventually, [[galling]] of the mating parts occurs, which triggers seizure. A converter with a seized [[overrunning clutch|stator clutch]] will exhibit very poor efficiency during the coupling phase, and in a motor vehicle, fuel consumption will drastically increase. Converter overheating under such conditions will usually occur if continued operation is attempted.
| |
| *'''Stator clutch breakage''': A very abrupt application of power can cause shock loading of the [[overrunning clutch|stator clutch]], resulting in breakage. If this occurs, the stator will freely counter-rotate in the direction opposite to that of the pump and almost no power transmission will take place. In an automobile, the effect is similar to a severe case of transmission slippage and the vehicle is all but incapable of moving under its own power.
| |
| *'''Blade deformation and fragmentation''': If subjected to abrupt loading or excessive heating of the converter, pump and/or turbine blades may be deformed, separated from their hubs and/or annular rings, or may break up into fragments. At the least, such a failure will result in a significant loss of efficiency, producing symptoms similar (although less pronounced) to those accompanying stator clutch failure. In extreme cases, catastrophic destruction of the converter will occur.
| |
| *'''Ballooning''': Prolonged operation under excessive loading, very abrupt application of load, or operating a torque converter at very high [[revolutions per minute|RPM]] may cause the shape of the converter's housing to be physically distorted due to internal pressure and/or the stress imposed by inertia (centrifugal force). Under extreme conditions, ballooning will cause the converter housing to rupture, resulting in the violent dispersal of hot oil and metal fragments over a wide area.'''
| |
| | |
| ==Manufacturers==
| |
| <!-- This list is incomplete. Please expand it if you can. -->
| |
| | |
| ===Current===
| |
| * [[Valeo]], produces Torque converter for Ford, GM
| |
| * [[Allison Transmission]], used in bus, refuse, fire, construction, distribution, military and specialty applications
| |
| * [[BorgWarner]], used in [[automobile]]s
| |
| * [[Subaru]], used in automobiles
| |
| * [[Twin Disc]], used in vehicle, marine and oilfield applications
| |
| * [[Voith Turbo-Transmissions]], used in many [[diesel locomotives]] and [[diesel multiple unit]]s
| |
| * [[ZF Friedrichshafen]], automobiles, forestry machines, popular in city [[bus]] applications
| |
| * [[Jatco]], used in automobiles
| |
| * [[Aisin AW]], used in automobiles
| |
| * [[Schaeffler_Group|LuK USA LLC]], produces Torque Converters for Ford, GM, Allison, and Hyundai
| |
| | |
| ===Past===
| |
| * Lysholm-Smith, named after its inventor, [[Alf Lysholm]], produced by [[Leyland Motors]] and used in buses from 1933-9 and also some [[British Rail Derby Lightweight]] and [[Ulster Transport Authority]] diesel multiple units
| |
| * Mekydro,<ref>http://www.intertrains.co.uk/glossary/m/mekydro-transmission.html</ref> used in [[British Rail Class 35]] ''Hymek'' locomotives.
| |
| * [[Packard]], used in the [[Ultramatic]] automobile transmission system
| |
| * [[Rolls-Royce Ltd|Rolls-Royce (Twin Disc)]], used in some [[British United Traction]] diesel multiple units
| |
| | |
| ==See also==
| |
| * [[Clutch]]
| |
| * [[Electrical brakes]]
| |
| * [[Fluid coupling]]
| |
| * [[Torque amplifier]]
| |
| * [[Water brake]]
| |
| | |
| ==References==
| |
| <references/> | |
| | |
| ==External links==
| |
| {{commons category|Torque converters}}
| |
| * [http://auto.howstuffworks.com/torque-converter.htm HowStuffWorks article on torque converters]
| |
| * [http://www.youtube.com/watch?v=wrGGCTkpND4 YouTube video about torque converters]
| |
| | |
| | |
| {{Powertrain}}
| |
| | |
| {{DEFAULTSORT:Torque Converter}}
| |
| [[Category:Variators]]
| |
| [[Category:Mechanical power control]]
| |
| [[Category:Mechanical power transmission]]
| |
| [[Category:Continuously variable transmissions]]
| |
| [[Category:Automotive transmission technologies]]
| |
| [[Category:Torque]]
| |