Aerosol

In heat transfer analysis, thermal diffusivity (usually denoted α but a, κ, Template:Reference necessary, and D are also used) is the thermal conductivity divided by density and specific heat capacity at constant pressure. It measures the ability of a material to conduct thermal energy relative to its ability to store thermal energy. It has the SI unit of m²/s. The formula is:

$\alpha =\frac{k}{\rho c_p}$

where

• $k$ is thermal conductivity (W/(m·K))
• $\rho$ is density (kg/m³)
• $c_p$ is specific heat capacity (J/(kg·K))

Together, $\rho c_p$ can be considered the volumetric heat capacity (J/(m³·K)).

As seen in the heat equation,

$\frac{\partial T}{\partial t}=\alpha {\mathrm{\nabla }}^{2}T$,

thermal diffusivity is the ratio of the time derivative of temperature to its curvature, quantifying the rate at which temperature concavity is "smoothed out". In a sense, thermal diffusivity is the measure of thermal inertia. In a substance with high thermal diffusivity, heat moves rapidly through it because the substance conducts heat quickly relative to its volumetric heat capacity or 'thermal bulk'.

Thermal diffusivity is often measured with the flash method. It involves heating a strip or cylindrical sample with a short energy pulse at one end and analyzing the temperature change (reduction in amplitude and phase shift of the pulse) a short distance away.

Thermal diffusivity of selected materials and substances

Material	Thermal diffusivity (m²/s)	Thermal diffusivity (mm²/s)
Pyrolytic graphite, parallel to layers	1.22 × 10−3	1220
Silver, pure (99.9%)	1.6563 × 10−4	165.63
Gold	1.27 × 10−4	127
Copper at 25°C	1.11 × 10−4	111
Aluminium	8.418 × 10−5	84.18
Al-10Si-Mn-Mg (Silafont 36) at 20°C	74.2 × 10−6	74.2
Aluminum 6061-T6 Alloy	6.4 × 10−5	64
Al-5Mg-2Si-Mn (Magsimal-59) at 20°C	44.0 × 10−6	44.0
Steel, 1% carbon	1.172 × 10−5	11.72
Steel, stainless 304A at 27°C	4.2 × 10−6	4.2
Steel, stainless 310 at 25°C	3.352 × 10−6	3.352
Inconel 600 at 25°C	3.428 × 10−6	3.428
Molybdenum (99.95%) at 25°C	54.3 × 10−6	54.3
Iron	2.3 × 10−5	23
Silicon	8.8 × 10−5	88
Quartz	1.4 × 10−6	1.4
Carbon/carbon composite at 25°C	216.5 × 10−6	216.5
Aluminium oxide (polycrystalline)	1.20 × 10−5	12.0
Silicon Dioxide (Polycrystalline)	8.3 × 10−7	0.83
Si3 N4 with CNTs 26°C	9.142 × 10−6	9.142
Si3 N4 without CNTs 26°C	8.605 × 10−6	8.605
PC (Polycarbonate) at 25°C	0.144 × 10−6	0.144
PP (Polypropylene) at 25°C	0.096 × 10−6	0.096
Paraffin at 25°C	0.081 × 10−6	0.081
PVC (Polyvinyl Chloride)	8 × 10−8	0.08
PTFE (Polytetrafluorethylene) at 25°C	0.124 × 10−6	0.124
Water at 25°C	0.143 × 10−6	0.143
Alcohol	7 × 10−8	0.07
Water vapour (1 atm, 400 K)	2.338 × 10−5	23.38
Air (300 K)	1.9 × 10−5	19
Argon (300 K, 1 atm)	Template:Val	22
Helium (300 K, 1 atm)	Template:Val	190
Hydrogen (300 K, 1 atm)	Template:Val	160
Nitrogen (300 K, 1 atm)	Template:Val	22
Pyrolytic graphite, normal to layers	3.6 × 10−6	3.6
Sandstone	1.12–1.19 × 10−6	1.15
Tin	4.0 × 10−5	40
Brick, common	5.2 × 10−7	0.52
Brick, adobe	2.7 × 10−7	0.27
Glass, window	3.4 × 10−7	0.34
Rubber	1.3 × 10−7Potter or Ceramic Artist Truman Bedell from Rexton, has interests which include ceramics, best property developers in singapore developers in singapore and scrabble. Was especially enthused after visiting Alejandro de Humboldt National Park.	0.13
Nylon	9 × 10−8	0.09
Wood (Yellow Pine)	8.2 × 10−8	0.082
Oil, engine (saturated liquid, 100 °C)	7.38 × 10−8	0.0738

See also

• Heat equation
• Laser flash analysis
• Thermodiffusion
• Thermal effusivity
• Thermal time constant

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.