|
|
| Line 1: |
Line 1: |
| {{Nanoelec}}
| | I'm Oscar and I live in a seaside city in northern Canada, Calgary. I'm 26 and I'm will soon finish my study at Dance.<br><br>my homepage - [http://www.successlakeseo.com/ levelland website marketing] |
| | |
| A '''nanowire''' is a nanostructure, with the diameter of the order of a nanometer (10<sup>−9</sup> meters). It can also be defined as the ratio of the length to width being greater than 20. Alternatively, nanowires can be defined as structures that have a thickness or diameter constrained to tens of [[nanometer]]s or less and an unconstrained length. At these scales, quantum mechanical effects are important — which coined the term "[[quantum wire]]s". Many different types of nanowires exist, including metallic (e.g., [[nickel|Ni]], [[platinum|Pt]], [[gold|Au]]), semiconducting (e.g., [[silicon|Si]], [[indium phosphide|InP]], [[gallium nitride|GaN]], etc.), and insulating (e.g., [[Silicon dioxide|SiO<sub>2</sub>]], [[Titanium dioxide|TiO<sub>2</sub>]]). [[Molecular nanowires]] are composed of repeating molecular units either organic (e.g. [[DNA]]) or inorganic (e.g. Mo<sub>6</sub>S<sub>9-x</sub>I<sub>x</sub>).
| |
| | |
| The nanowires could be used, in the near future, to link tiny [[electronic component|component]]s into extremely small [[Electronic circuit|circuits]]. Using [[nanotechnology]], such components could be created out of [[chemical compound]]s.
| |
| | |
| ==Overview==
| |
| Typical nanowires exhibit aspect ratios (length-to-width ratio) of 1000 or more. As such they are often referred to as one-dimensional (1-D) materials. Nanowires have many interesting properties that are not seen in bulk or 3-D materials. This is because [[electron]]s in nanowires are [[quantum]] confined laterally and thus occupy energy levels that are different from the traditional continuum of energy levels or bands found in bulk materials.
| |
| | |
| Peculiar features of this [[quantum confinement]] exhibited by certain nanowires manifest themselves in discrete values of the [[electrical conductance]]. Such discrete values arise from a quantum mechanical restraint on the number of electrons that can travel through the wire at the nanometer scale. These discrete values are often referred to as the quantum of conductance and are [[integer]] multiples of
| |
| | |
| :<math>\frac{2e^2}{h} \simeq 77.41\; \mu S</math>
| |
| | |
| They are inverse of the well-known resistance unit ''h/e<sup>2</sup>'', which is roughly equal to 25812.8 [[Ohm (unit)|ohm]]s, and referred to as the von Klitzing constant ''R''<sub>K</sub> (after [[Klaus von Klitzing]], the discoverer of [[Quantum Hall Effect#Applications|exact quantization]]). Since 1990, a fixed conventional value ''R''<sub>K-90</sub> is accepted.<ref>[http://physics.nist.gov/cgi-bin/cuu/Value?rk|search_for=RK von Klitzing constant]</ref>
| |
| | |
| Examples of nanowires include inorganic molecular nanowires (Mo<sub>6</sub>S<sub>9-x</sub>I<sub>x</sub>, Li<sub>2</sub>Mo<sub>6</sub>Se<sub>6</sub>), which can have a diameter of 0.9 nm and be hundreds of micrometers long. Other important examples are based on semiconductors such as InP, Si, GaN, etc., dielectrics (e.g. SiO<sub>2</sub>,TiO<sub>2</sub>), or metals (e.g. Ni, Pt).
| |
| | |
| There are many applications where nanowires may become important in electronic, opto-electronic and nanoelectromechanical devices, as additives in advanced composites, for metallic interconnects in nanoscale quantum devices, as field-emitters and as leads for biomolecular nanosensors.
| |
| | |
| ==Synthesis of nanowires==
| |
| [[Image:Epitaxial Nanowire Heterostructures SEM image.jpg|thumb|300px|An [[Scanning Electron Microscope|SEM]] image of epitaxial nanowire heterostructures grown from catalytic gold nanoparticles.]]
| |
| | |
| There are two basic approaches to synthesizing nanowires: top-down and bottom-up. A top-down approach reduces a large piece of material to small pieces, by various means such as [[lithography]] or [[electrophoresis]]. A bottom-up approach synthesizes the nanowire by combining constituent [[adatom]]s. Most synthesis techniques use a bottom-up approach.
| |
|
| |
| Nanowire production uses several common laboratory techniques, including suspension, electrochemical deposition, vapor deposition, and [[Vapor-liquid-solid method|VLS]] growth. [[Ion track technology (track replication)|Ion track technology]] enables growing homogeneous and segmented nanowires down to 8 nm diameter.
| |
| | |
| ===Suspension===
| |
| A suspended nanowire is a wire produced in a high-vacuum chamber held at the longitudinal extremities. Suspended nanowires can be produced by:
| |
| *The chemical etching of a larger wire
| |
| *The bombardment of a larger wire, typically with highly energetic ions
| |
| *Indenting the tip of a [[Scanning tunneling microscope|STM]] in the surface of a metal near its melting point, and then retracting it
| |
| | |
| ===VLS Growth===
| |
| A common technique for creating a nanowire is [[Vapor-Liquid-Solid method|Vapor-Liquid-Solid]] (VLS) synthesis. This process can produce crystalline nanowires of some semiconductor materials. It uses as source material either laser [[ablation|ablated]] particles or a feed gas such as [[silane]].
| |
| | |
| VLS synthesis requires a catalyst. For nanowires, the best catalysts are liquid metal (such as [[gold]]) [[nanocluster]]s, which can either be self-assembled from a thin film by [[dewetting]], or purchased in colloidal form and deposited on a substrate.
| |
| | |
| The source enters these nanoclusters and begins to saturate them. On reaching supersaturation, the source solidifies and grows outward from the nanocluster. Simply turning off the source can adjust the final length of the nanowire. Switching sources while still in the growth phase can create compound nanowires with super-lattices of alternating materials.
| |
| | |
| A single-step vapour phase reaction at elevated temperature synthesises inorganic nanowires such as Mo<sub>6</sub>S<sub>9-x</sub>I<sub>x</sub>. From another point of view, such nanowires are cluster [[polymer]]s.
| |
| | |
| ===Solution-phase synthesis===
| |
| Solution-phase synthesis refers to techniques that grow nanowires in solution. They can produce nanowires of many types of materials. Solution-phase synthesis has the advantage that it can produce very large quantities, compared to other methods. In one technique, the [[polyol]] synthesis, ethylene glycol is both solvent and reducing agent. This technique is particularly versatile at producing nanowires of lead, platinum, and silver.
| |
| | |
| The supercritical fluid-liquid-solid growth method<ref>Holmes, Justin D.; Johnston, Keith P.; Doty, R. Christopher and Korgel, Brian A., Control of thickness and orientation of solution-grown silicon nanowires. Science (2000), 287(5457), 1471-1473.</ref><ref>Heitsch, Andrew T.; Akhavan, Vahid A.; Korgel, Brian A., Rapid SFLS Synthesis of Si Nanowires Using Trisilane with In situ Alkyl-Amine Passivation. Chemistry of Materials (2011), 23(11), 2697-2699.</ref> can be used to synthesize semiconductor nanowires, e.g., Si and Ge. By using metal nanocrystals as seeds,<ref>Hanrath, Tobias and Korgel, Brian A., Supercritical fluid-liquid-solid (SFLS) synthesis of Si and Ge nanowires seeded by colloidal metal nanocrystals. Advanced Materials (2003), 15(5), 437-440.</ref> Si and Ge organometallic precursors are fed into a reactor filled with a supercritical organic solvent, such as toluene. Thermolysis results in degradation of the precursor, allowing release of Si or Ge, and dissolution into the metal nanocrystals. As more of the semiconductor solute is added from the supercritical phase (due to a concentration gradient), a solid crystallite precipitates, and a nanowire grows uniaxially from the nanocrystal seed.
| |
| | |
| ==Physics of nanowires==
| |
| | |
| ===Conductivity of nanowires===
| |
| [[Image:Wire15micron.jpg|thumb|300px|An [[Scanning Electron Microscope|SEM]] image of a 15 micrometre nickel wire.]]
| |
| | |
| [[File:Threshold formation nowatermark.gif|thumb|right|500px|Atomistic simulation result for formation of inversion channel (electron density) and attainment of threshold voltage (IV) in a nanowire MOSFET. Note that the threshold voltage for this device lies around 0.45V.]]
| |
| | |
| Several physical reasons predict that the conductivity of a nanowire will be much less than that of the corresponding bulk material. First, there is scattering from the wire boundaries, whose effect will be very significant whenever the wire width is below the free electron mean free path of the bulk material. In copper, for example, the mean free path is 40 nm. Copper nanowires less than 40 nm wide will shorten the mean free path to the wire width.
| |
| | |
| Nanowires also show other peculiar electrical properties due to their size. Unlike single wall carbon nanotubes, whose motion of electrons can fall under the regime of [[ballistic transport]] (meaning the electrons can travel freely from one electrode to the other), nanowire conductivity is strongly influenced by edge effects. The edge effects come from atoms that lay at the nanowire surface and are not fully bonded to neighboring atoms like the atoms within the bulk of the nanowire. The unbonded atoms are often a source of defects within the nanowire, and may cause the nanowire to conduct electricity more poorly than the bulk material. As a nanowire shrinks in size, the surface atoms become more numerous compared to the atoms within the nanowire, and edge effects become more important.
| |
| | |
| Furthermore, the conductivity can undergo a quantization in energy: i.e. the energy of the electrons going through a nanowire can assume only discrete values, which are multiples of the [[Von Klitzing constant]] ''G = 2e<sup>2</sup>/h'' (where ''e'' is the charge of the electron and ''h'' is the [[Planck constant]]).
| |
| | |
| The conductivity is hence described as the sum of the transport by separate ''channels'' of different quantized energy levels. The thinner the wire is, the smaller the number of channels available to the transport of electrons.
| |
| | |
| This quantization has been demonstrated by measuring the conductivity of a nanowire suspended between two electrodes while pulling it: as its diameter reduces, its conductivity decreases in a stepwise fashion and the plateaus correspond to multiples of G.
| |
| | |
| The quantization of conductivity is more pronounced in semiconductors like Si or GaAs than in metals, due to their lower electron density and lower effective mass. It can be observed in 25 nm wide silicon fins, and results in increased [[threshold voltage]]. In practical terms, this means that a [[MOSFET]] with such nanoscale silicon fins, when used in digital applications, will need a higher gate (control) voltage to switch the transistor on.<ref>{{cite journal|author=A. T. Tilke ''et al.''|journal=Physical Rev. B|volume=68|page=075311|year=2003}}</ref>
| |
| | |
| ===Welding nanowires===
| |
| To incorporate nanowire technology into industrial applications, researchers in 2008 developed a method of welding nanowires together: a [[sacrificial metal]] nanowire is placed adjacent to the ends of the pieces to be joined (using the manipulators of a [[scanning electron microscope]]); then an electric current is applied, which fuses the wire ends. The technique fuses wires as small as 10 nm.<ref>''Wee Welding with Nanosolder'', [[Chemical & Engineering News]], '''86''', 51 (22 Dec. 2008), p. 35</ref>
| |
| | |
| For nanowires with diameters less than 10 nm, existing welding techniques, which require precise control of the heating mechanism and which may introduce the possibility of damage, will not be practical. Recently scientists discovered that single-crystalline ultrathin gold nanowires with diameters ~3-10 nm can be "cold-welded" together within seconds by mechanical contact alone, and under remarkably low applied pressures (unlike macro- and micro-scale [[cold welding]] process).<ref>''Cold welding of ultrathin gold nanowires'', [[Nature Nanotechnology]], Y. Lu et al. '''5''', (14 Feb. 2010, {{doi|10.1038/nnano.2010.4}}), p. 213-224</ref> High-resolution [[transmission electron microscopy]] and [[in situ]] measurements reveal that the welds are nearly perfect, with the same crystal orientation, strength and electrical conductivity as the rest of the nanowire. The high quality of the welds is attributed to the nanoscale sample dimensions, oriented-attachment mechanisms and mechanically assisted fast [[surface diffusion]]. Nanowire welds were also demonstrated between gold and silver, and silver nanowires (with diameters ~5-15 nm) at near room temperature, indicating that this technique may be generally applicable for ultrathin metallic nanowires. Combined with other nano- and microfabrication technologies,<ref>''Nanowire crossbar arrays as address decoders for integrated nanosystems'', [[Science]], Zhong, Z., Wang, D., Cui, Y., Bockrath, M. W. & Lieber, C. M. '''302''', (2003), p. 1377</ref><ref>''Polymer pen lithography'', [[Science]], F. Huo et al. '''321''', (2008), p. 1658-1660</ref> [[cold welding]] is anticipated to have potential applications in the future [[Top-down and bottom-up design#Nanotechnology|bottom-up]] assembly of metallic one-dimensional nanostructures.
| |
| | |
| ==Applications of nanowires==
| |
| | |
| ===Electronic devices===
| |
| Nanowires still belong to the experimental world of laboratories. However, they may complement or replace [[carbon nanotube]]s in some applications. Some early experiments have shown how they can be used to build the next generation of computing devices.
| |
| | |
| To create active electronic elements, the first key step was to chemically dope a semiconductor nanowire. This has already been done to individual nanowires to create p-type and n-type semiconductors.
| |
| | |
| The next step was to find a way to create a [[p–n junction]], one of the simplest electronic devices. This was achieved in two ways. The first way was to physically cross a p-type wire over an n-type wire. The second method involved chemically doping a single wire with different dopants along the length. This method created a p-n junction with only one wire.
| |
| | |
| After p-n junctions were built with nanowires, the next logical step was to build [[logic gates]]. By connecting several p-n junctions together, researchers have been able to create the basis of all logic circuits: the [[AND gate|AND]], [[OR gate|OR]], and [[NOT gate|NOT]] gates have all been built from semiconductor nanowire crossings.
| |
| | |
| In August 2012, researchers reported constructing the first [[NAND gate]] from undoped silicon nanowires. This avoids the problem of how to achieve precision doping of complementary nanocircuits, which is unsolved. They were able to control the [[Schottky barrier]] to achieve low-resistance contacts by placing a [[silicide]] layer in the metal-silicon interface.<ref>http://arxiv.org/pdf/1208.1465v1.pdf</ref>
| |
| | |
| It is possible that semiconductor nanowire crossings will be important to the future of digital computing. Though there are other uses for nanowires beyond these, the only ones that actually take advantage of physics in the nanometer regime are electronic.
| |
| | |
| Nanowires are being studied for use as photon ballistic waveguides as interconnects in [[quantum dot]]/quantum effect well photon logic arrays. Photons travel inside the tube, electrons travel on the outside shell.
| |
| | |
| When two nanowires acting as photon waveguides cross each other the juncture acts as a [[quantum dot]].
| |
| | |
| Conducting nanowires offer the possibility of connecting molecular-scale entities in a molecular computer. Dispersions of conducting nanowires in different polymers are being investigated for use as transparent electrodes for flexible flat-screen displays.
| |
| | |
| Because of their high [[Young's moduli]], their use in mechanically enhancing composites is being investigated. Because nanowires appear in bundles, they may be used as tribological additives to improve friction characteristics and reliability of electronic transducers and actuators.
| |
| | |
| Because of their high aspect ratio, nanowires are also uniquely suited to [[Dielectrophoresis|dielectrophoretic]] manipulation,<ref>{{cite journal|author = [[Alex Wissner-Gross|Wissner-Gross, A. D.]] |title = Dielectrophoretic reconfiguration of nanowire interconnects |journal = Nanotechnology|volume = 17|pages = 4986–4990|year = 2006|url =http://www.alexwg.org/link?url=http%3A%2F%2Fwww.alexwg.org%2Fpublications%2FNanotechnology_17-4986.pdf}}</ref><ref>{{cite news|url=http://nanotechweb.org/articles/journal/5/10/2/1|date=October 19, 2006|title=Nanowires get reconfigured}}</ref><ref>{{cite journal|author = Grange, R.; Choi, J.W.; Hsieh, C.L.; Pu, Y.; Magrez, A.; Smajda, R.; Forro, L.; Psaltis, D. |title = Lithium niobate nanowires: synthesis, optical properties and manipulation |journal = Applied Physics Letters|volume = 95|pages = 143105|year = 2009|url =http://link.aip.org/link/?APPLAB/95/143105/1}}</ref> which offers a low-cost, bottom-up approach to integrating suspended dielectric metal oxide nanowires in electronic devices such as UV, water vapor, and ethanol sensors.<ref>{{cite doi|10.1117/2.1201312.005260}}</ref>
| |
| | |
| ===Sensing of proteins and chemicals using semiconductor nanowires===
| |
| In an analogous way to FET devices in which the modulation of conductance (flow of electrons/holes) in the semiconductor, between the input (source) and the output (drain) terminals, is controlled by electrostatic potential variation (gate-electrode) of the charge carriers in the device conduction channel, the methodology of a Bio/Chem-FET is based on the detection of the local change in charge density, or so-called “field effect”, that characterizes the recognition event between a target molecule and the surface receptor.
| |
| | |
| This change in the surface potential influences the Chem-FET device exactly as a ‘gate’ voltage does, leading to a detectable and measurable change in the device conduction. When these devices are fabricated using semiconductor nanowires as the transistor element the binding of a chemical or biological species to the surface of the sensor can lead to the depletion or accumulation of charge carriers in the "bulk" of the nanometer diameter nanowire i.e. (small cross section available for conduction channels). Moreover, the wire, which serves as a tunable conducting channel, is in close contact with the sensing environment of the target, leading to a short response time, along with orders of magnitude increase in the sensitivity of the device as a result of the huge S/V ratio of the nanowires.
| |
| | |
| While several inorganic semiconducting materials such as Si, Ge, or metal oxides (e.g. In2O3, SnO2, ZnO, etc.) have been used for the preparation of nanowires. Silicon nanowires are usually the material of choice when fabricating nanowire FET-based chemo/biosensors.
| |
| | |
| Several examples of the use of silicon nanowire sensing devices include the ultra sensitive, real-time sensing of biomarker proteins for cancer, detection of single virus particles, and the detection of nitro-aromatic explosive materials such as 2,4,6 Tri-nitrotoluene (TNT) in sensitives superior to these of canines.<ref>{{cite journal|last=Engel|first=Yoni|coauthors=Elnathan, R.; Pevzner, A.;, Davidi G.; Flaxer E.; Patolsky F.;|title=Supersensitive Detection of Explosives by Silicon Nanowire Arrays|journal=Angewandte Chemie international edition|date=10|year=2010|month=9|volume=49|issue=38|pages=6830–6835|doi=10.1002/anie.201000847|url=http://onlinelibrary.wiley.com/doi/10.1002/anie.201000847/abstract}}</ref>
| |
| | |
| ==== Limitations of sensing with Silicon nanowire FET devices ====
| |
| Generally, the charges on dissolved molecules and macromolecules are screened by dissolved counterions, since in most cases molecules bound to the devices are separated from the sensor surface by approximately 2–12 nm (the size of the receptor proteins or DNA linkers bound to the sensor surface). As a result of the screening, the electrostatic potential that arises from charges on the analyte molecule decays exponentially toward zero with distance. Thus, for optimal sensing, the [[Debye length]] must be carefully selected for nanowire FET measurements.
| |
| One approach of overcoming this limitation employs fragmentation of the antibody-capturing units and control over surface receptor density, allowing more intimate binding to the nanowire of the target protein. This approach proved useful for dramatically enhancing the sensitivity of [[Cardiac marker|cardiac biomarkers]] (e.g. [[Troponin]]) detection directly from serum for the diagnosis of acute myocardial infarction.<ref>{{cite journal|last=Elnathan|first=Roey|coauthors=Kwiat, M.; Pevzner, A.; Engel, Y.; Burstein, L.; Khatchtourints, A.; Lichtenstein, A.; Kantaev, R.; Patolsky, F.;|title=Biorecognition Layer Engineering: Overcoming Screening Limitations of Nanowire-Based FET Devices|journal=Nano Letters|date=10|year=2012|month=9|volume=12|issue=10|pages=5245–5254|doi=10.1021/nl302434w|url=http://pubs.acs.org/doi/abs/10.1021/nl302434w}}</ref>
| |
| | |
| ===Probes for exploring cells interiors===
| |
| | |
| ==See also==
| |
| {{Portal|Nanotechnology}}
| |
| {{colbegin|3}}
| |
| *[[Carbon nanotube]]s
| |
| *[[Inorganic nanotube]]s
| |
| *[[Molecular nanowires]]
| |
| *[[Nanoantenna]]
| |
| *[[Nanorods]]
| |
| *[[Nanowire battery]]
| |
| *[[Solar cell]]
| |
| *[[Quantum Hall effect]]
| |
| {{colend}}
| |
| | |
| ==References==
| |
| {{Reflist|2}}
| |
| | |
| ==Further reading==
| |
| * {{cite journal | author = Gioia G. and Dai X. | year = 2009 | title = Surface stress and reversing size effect in the initial yielding of ultrathin films | journal = JAM | volume = 73 | pages = 254–258 | url = http://web.mechse.illinois.edu/research/gioia/Art/yield_stress_films_JAM.pdf }}
| |
| *K. v. Klitzing, G. Dorda, and M. Pepper; Phys. Rev. Lett. 45, 494-497 (1980)[http://www.fkf.mpg.de/klitzing/publications/abstracts/vk00xx/vk0000.html]
| |
| *R. Landauer, J. Phys.: Cond. Matter 1, 8099 (1989) [http://www.jsapi.jsap.or.jp/Pdf/Number03/CuttingEdge1.pdf]
| |
| *N. Oncel et al., Phys. Rev. Lett. 95, 116801, (2005)
| |
| *J. Chen, B. Wiley, Y. Xia. One-Dimensional Nanostructures of Metals: Large-Scale Synthesis and Some Potential Applications. ''Langmuir'' 2007, 23, 4120.
| |
| * Ross, Frances M., [http://iopscience.iop.org/0034-4885/73/11/114501 "Controlling nanowire structures through real time growth studies"], ''Reports on Progress in Physics'', Volume 73, Number 11, 2010
| |
| * Bullis, Kevin, [http://www.technologyreview.com/read_article.aspx?ch=nanotech&sc=&id=17008&pg=1 "Nanowire Transistors Faster than Silicon"], ''MIT [[Technology Review]]'', June 20, 2006
| |
| | |
| ==External links==
| |
| *[http://www.nanohedron.com Nanohedron.com | Nano Image Gallery] several images of nanowires are included in the galleries.
| |
| *[http://news-service.stanford.edu/news/2008/january9/nanowire-010908.html Stanford's nanowire battery holds 10 times the charge of existing ones]
| |
| *[http://www.fkf.mpg.de/klitzing/publications/abstracts/vk00xx/vk0000.html Original article on the Quantum Hall Effect: K. v. Klitzing, G. Dorda, and M. Pepper; Phys. Rev. Lett. 45, 494-497 (1980).]
| |
| *[http://www.abc.net.au/science/news/stories/2006/1813845.htm Strongest theoretical nanowire produced at Australia's University of Melbourne.]
| |
| *[http://www.upenn.edu/pennnews/article.php?id=1217 Penn Engineers Design Electronic Computer Memory in Nanoscale Form That Retrieves Data 1,000 Times Faster.]
| |
| *[http://pne.tnw.utwente.nl/ One atom thick, hundreds of nanometers long Pt-nanowires are one of the best examples of self-assembly. (University of Twente)]
| |
| | |
| {{Nanotech footer}}
| |
| | |
| [[Category:Nanoelectronics]]
| |
| [[Category:Electrical connectors]]
| |
| [[Category:Mesoscopic physics]]
| |