|
|
| Line 1: |
Line 1: |
| {{ref improve|date=February 2012}}
| | Hi there. Allow me start by introducing the writer, her title is Sophia. What me and my family love is doing ballet but I've been using on new issues recently. My day job is an invoicing officer but I've already applied for an additional 1. Some time ago she selected to live in Alaska and her parents live close [http://kpupf.com/xe/talk/735373 psychic solutions by lynne]. |
| The '''Fanning friction factor''', named after John Thomas Fanning (1837–1911), is a [[dimensionless number]] used in fluid flow calculations. It is related to the [[shear stress]] at the wall as:
| |
| | |
| :<math>
| |
| \tau = \frac{ f \rho v^2}{2}
| |
| </math>
| |
| | |
| where:
| |
| | |
| *<math>\tau</math> is the shear stress at the wall
| |
| *'''<math>f</math>''' is the Fanning friction factor of the pipe
| |
| *'''<math>v</math>''' is the fluid velocity in the pipe
| |
| *'''<math>\rho</math>''' is the density of the fluid
| |
| | |
| The wall shear stress can, in turn, be related to the pressure loss by multiplying the wall shear stress by the wall area (<math>2 \pi R L</math> for a pipe) and dividing by the cross-sectional flow area (<math> \pi R^2</math> for a pipe).
| |
| | |
| The friction [[Head (hydraulic)|head]] can be related to the pressure loss due to friction by dividing the pressure loss by the product of the acceleration due to gravity and the density of the fluid. Accordingly, the relationship between the friction head and the Fanning friction factor is:
| |
| | |
| :<math>
| |
| h_f = \frac{ 2fv^2L}{gD}
| |
| </math>
| |
| | |
| where:
| |
| | |
| *<math>h_f</math> is the friction loss (in head) of the pipe.
| |
| *'''<math>f</math>''' is the Fanning friction factor of the pipe.
| |
| *'''<math>v</math>''' is the fluid velocity in the pipe.
| |
| *'''<math>L</math>''' is the length of pipe.
| |
| *'''<math>g</math>''' is the local acceleration of gravity.
| |
| *'''<math>D</math>''' is the pipe diameter.
| |
| | |
| == Fanning friction factor formulæ ==
| |
| | |
| This friction factor is one-fourth of the [[Darcy friction factor]], so attention must be paid to note which one of these is meant in the "friction factor" chart or equation consulted. Of the two, the Fanning friction factor is the more commonly used by Chemical Engineers and those following the British convention.
| |
| | |
| The formulae below may be used to obtain the Fanning friction factor for common applications.
| |
| | |
| The friction factor for laminar flow in round tubes is often taken to be:
| |
| | |
| <math>f= \frac{16}{Re} </math>
| |
| | |
| where Re is the [[Reynolds number]] of the flow.
| |
| | |
| For a square channel the value used is:
| |
| | |
| <math>f = \frac{ 14.227}{Re} </math>
| |
| | |
| The Darcy friction factor can also be expressed as<ref>Yunus, Cengel. Heat and Mass Transfer. New York: Mc Graw Hull, 2007.</ref>
| |
| | |
| <math>f = \frac{8 \tau_w}{\rho V_{avg} ^ 2} </math>
| |
| | |
| where:
| |
| | |
| * <math>\tau_w</math> is the shear stress at the wall
| |
| * <math>\rho</math> is the density of the fluid
| |
| * <math>V_{avg} </math> is the average fluid velocity
| |
| | |
| For the turbulent flow regime, the relationship between the Fanning friction factor and the Reynolds number is more complex and is governed by the [[Colebrook equation]] <ref>Colebrook, C.F. and White, C.M. 1937, "Experiments with Fluid friction roughened pipes.", ''Proc. R.Soc.(A)'', '''161'''</ref> which is implicit in <math>f</math>:
| |
| | |
| :<math>{1 \over \sqrt{\mathit{f}}}= -4.0 \log_{10} \left(\frac{\frac{\epsilon}{d}}{3.7} + {\frac{1.256}{Re \sqrt{\mathit{f} } } } \right) , \text{turbulent flow}</math>
| |
| | |
| Various [[Darcy friction factor formulae|explicit approximations]] of the related Darcy friction factor have been developed for turbulent flow.
| |
| | |
| Stuart W. Churchill<ref>Churchill, S.W., 1977, "Friction factor equation spans all fluid-flow regimes", ''Chem.
| |
| Eng.'', '''91''' </ref> developed a formula that covers the friction factor for both laminar and turbulent flow (note that <math> f </math> represents the Moody friction factor).
| |
| | |
| :<math> f = 8 \left(
| |
| \left( \frac {8} {Re} \right) ^ {12}
| |
| + \left( A+B \right) ^ {-1.5}
| |
| \right) ^ {\frac {1} {12} } </math>
| |
| :<math>A = \left( 2.457 \ln \left( \left( \left( \frac {7} {Re} \right) ^ {0.9} + 0.27 \frac {\epsilon} {D} \right)^ {-1}\right) \right) ^ {16} </math>
| |
| :<math>B = \left( \frac {37530} {Re} \right) ^ {16} </math>
| |
| | |
| == References ==
| |
| <references/>
| |
| | |
| {{DEFAULTSORT:Fanning Friction Factor}}
| |
| [[Category:Dimensionless numbers of fluid mechanics]]
| |
| [[Category:Equations of fluid dynamics]]
| |
| [[Category:Fluid dynamics]]
| |
| [[Category:Piping]]
| |
Hi there. Allow me start by introducing the writer, her title is Sophia. What me and my family love is doing ballet but I've been using on new issues recently. My day job is an invoicing officer but I've already applied for an additional 1. Some time ago she selected to live in Alaska and her parents live close psychic solutions by lynne.