|
|
| Line 1: |
Line 1: |
| {{Refimprove|date=January 2012}}
| | Myrtle Benny is how I'm called and I feel comfortable when individuals use the full title. For many years I've been operating as a payroll clerk. Puerto Rico is where he's been residing for years and he will by no means move. Doing ceramics is what adore performing.<br><br>Here is my site; home std test kit - [http://www.sex-porn-tube.ch/blog/36870 visit link] - |
| '''Antenna measurement''' techniques refers to the testing of [[antenna (radio)|antennas]] to ensure that the antenna meets specifications or simply to characterize it. Typical parameters of antennas are gain, radiation pattern, beamwidth, polarization, and impedance.
| |
| | |
| The [[antenna pattern]] is the response of the antenna to a plane wave incident from a given direction or the relative power density of the wave transmitted by the antenna in a given direction. For a reciprocal antenna, these two patterns are identical. A multitude of antenna pattern measurement techniques have been developed. The first technique developed was the far-field range, where the antenna under test (AUT) is placed in the far-field of a range antenna. Due to the size required to create a far-field range for large antennas, near-field techniques were developed, which allow the measurement of the field on a surface close to the antenna (typically 3 to 10 times its [[wavelength]]). This measurement is then predicted to be the same at [[infinity]]. A third common method is the compact range, which uses a [[Reflector (antenna)|reflector]] to create a field near the AUT that looks approximately like a plane-wave.
| |
| | |
| ==Far-field range (FF)==
| |
| The [[far-field]] range was the original antenna measurement technique, and consists of placing the AUT a long distance away from the [[instrumentation]] antenna. Generally, the far-field distance or [[Fraunhofer distance]], ''d'', is considered to be
| |
| | |
| :<math>d = {{2D^2}\over{\lambda}}</math>,
| |
| | |
| where D is the maximum dimension of the antenna and <math>{\lambda}</math> is the wavelength of the radio wave.<ref>C.A. Balanis. Antenna Theory: Analysis and Design, 3rd ed. Wiley Interscience, 2005.</ref> Separating the AUT and the instrumentation antenna by this distance reduces the phase variation across the AUT enough to obtain a reasonably good antenna pattern.
| |
| | |
| IEEE suggests the use of their antenna measurement standard, document number IEEE-Std-149-1979 for far-field ranges and measurement set-up for various techniques including ground-bounce type ranges.
| |
| | |
| ==Near-field range (NF)==
| |
| {{main|Electromagnetic near-field scanner}}
| |
| | |
| ===Planar near-field range===
| |
| Planar [[near and far field|near-field]] measurements are conducted by scanning a small probe antenna over a planar surface. These measurements are then transformed to the far-field by use of a [[Fourier transform]], or more specifically by applying a method known as stationary phase<ref>''Asymptotic Behavior of Monodromy'', Springer Berlin / Heidelberg, 1991, ISBN 978-3-540-55009-9</ref> to the [[Laplace transform]] . Three basic types of planar scans exist in near field measurements.
| |
| | |
| ====Rectangular planar scanning====
| |
| | |
| The probe moves in the [[Cartesian coordinate system]] and its linear movement creates a regular rectangular sampling grid with a maximum near-field sample spacing of Δx = Δy = λ /2.
| |
| | |
| ====Polar planar scanning====
| |
| More complicated solution to the rectangular scanning method is the plane polar scanning method.
| |
| | |
| [[File:PolarGrid.svg|210px]]
| |
| | |
| ====Bi-polar planar scanning====
| |
| The bi-polar technique is very similar to the plane polar configuration.
| |
| | |
| [[File:BipolarGrid.svg|210px]]
| |
| | |
| ===Cylindrical near-field range===
| |
| Cylindrical near-field ranges measure the electric field on a cylindrical surface close to the AUT. Cylindrical [[harmonics]] are used transform these measurements to the far-field.
| |
| | |
| [[File:CylindricalGrid.svg|210px]]
| |
| | |
| ===Spherical near-field range===
| |
| Spherical near-field ranges measure the electric field on a spherical surface close to the AUT. Spherical harmonics are used transform these measurements to the far-field
| |
| | |
| ==Free-space ranges==
| |
| {{Expand section|date=June 2008}}
| |
| | |
| The formula for electromagnetic radiation dispersion and information is:
| |
| | |
| :<math>\displaystyle D^2=\frac{P}{S} \propto \!\, 3dB</math>
| |
| | |
| Where D=Distance, P=Power, and S=Speed
| |
| | |
| What this means is that double the communication distance requires four times the power. It also means double power allows double communication speed (bit rate). Double power is approx. 3dB (10 log(2) to be exact) increase. Of course in the real world there are all sorts of other phenomena which enter in, such as Fresnel canceling, path loss, background noise, etc.
| |
| | |
| ===Compact range===
| |
| A Compact Antenna Test Range (CATR) is a facility which is used to provide convenient testing of antenna systems at frequencies where obtaining far-field spacing to the AUT would be infeasible using traditional [[free space]] methods. It was invented by [[Richard C. Johnson]] at the [[Georgia Tech Research Institute]].<ref>{{cite news|url=http://www.whistle.gatech.edu/archives/03/feb/10/johnson.html|title=GTRI antenna expert and engineering mentor dies|first=Lea|last=McLees|work=The Whistle|publisher=[[Georgia Institute of Technology]]|date=2010-02-03|accessdate=2011-11-09}}</ref> The CATR uses a source antenna which radiates a spherical wavefront and one or more secondary reflectors to collimate the radiated spherical wavefront into a planar wavefront within the desired test zone. One typical embodiment uses a horn feed antenna and a [[parabolic reflector]] to accomplish this.
| |
| | |
| The CATR is used for [[microwave]] and [[millimeter wave]] frequencies where the 2 D<sup>2</sup>/λ far-field distance is large, such as with high-gain reflector antennas. The size of the range that is required can be much less than the size required for a full-size far-field anechoic chamber, although the cost of fabrication of the specially-designed CATR reflector can be expensive due to the need to ensure precision of the reflecting surface (typically less than λ/100 RMS surface accuracy) and to specially treat the edge of the reflector to avoid diffracted waves which can interfere with the desired beam pattern.
| |
| | |
| ===Elevated range===
| |
| A means of reducing reflection from waves bouncing off the ground.
| |
| | |
| ===Slant range===
| |
| A means of eliminating symmetrical wave reflection.
| |
| | |
| ==Antenna parameters==
| |
| Except for polarization, the SWR is the most easily measured of the parameters above. Impedance can be measured with specialized equipment, as it relates to the [[complex number|complex]] SWR. Measuring radiation pattern requires a sophisticated setup including significant clear space (enough to put the sensor into the antenna's [[far field]], or an anechoic chamber designed for antenna measurements), careful study of experiment geometry, and specialized measurement equipment that rotates the antenna during the measurements.
| |
| | |
| ===Radiation pattern ===
| |
| | |
| The [[radiation pattern]] is a graphical depiction of the relative field strength transmitted from or received by the antenna, and shows [[sidelobe]]s and backlobes. As antennas radiate in space often several curves are necessary to describe the antenna. If the radiation of the antenna is symmetrical about an axis (as is the case in dipole, [[helical antenna|helical]] and some [[parabolic antenna|parabolic]] antennas) a unique graph is sufficient.
| |
| | |
| Each antenna supplier/user has different standards as well as plotting formats. Each format has its own advantages and disadvantages. Radiation pattern of an antenna can be defined as the locus of all points where the emitted power per unit surface is the same. The radiated power per unit surface is proportional to the squared electrical field of the electromagnetic wave. The radiation pattern is the locus of points with the same electrical field. In this representation, the reference is usually the best angle of emission. It is also possible to depict the directive gain of the antenna as a function of the direction. Often the gain is given in [[decibels]].
| |
| | |
| The graphs can be drawn using [[Cartesian coordinate system|cartesian (rectangular) coordinates]] or a [[Polar coordinate system|polar plot]]. This last one is useful to measure the beamwidth, which is, by convention, the angle at the -3dB points around the max gain. The shape of curves can be very different in cartesian or polar coordinates and with the choice of the limits of the logarithmic scale. The four drawings below are the radiation patterns of a same [[Dipole antenna#Half-wave dipole or dipole (lambda over 2)|half-wave antenna]].
| |
| | |
| {| class="wikitable"
| |
| | [[Image:RadPatt-lin.png|thumb|340px|Radiation pattern of a half-wave dipole antenna. Linear scale.]]
| |
| | [[Image:HWDipoleGain.svg|thumb|340px|Gain of a half-wave dipole. The scale is in dBi.]]
| |
| |-
| |
| |[[Image:RadPatt-Cart.png|right|thumb|340px|Gain of a half-wave dipole. Cartesian representation.]]
| |
| |[[Image:L-over2-rad-pat-per.jpg|thumb|340px|3D Radiation pattern of a half-wave dipole antenna.]]
| |
| |}
| |
| | |
| ===Efficiency===
| |
| {{main|Antenna efficiency}}
| |
| "''[[Electrical efficiency|Efficiency]]''" is the ratio of power actually radiated by an antenna to the electrical power it receives from a transmitter. A [[dummy load]] may have an [[Standing wave ratio|SWR]] of 1:1 but an efficiency of 0, as it absorbs all the incident power, producing heat but radiating no [[Radio frequency|RF]] energy; [[Standing wave ratio|SWR]] is no measure of an antenna's efficiency. Radiation in an antenna is caused by [[radiation resistance]] which cannot be directly measured but is a component of the total [[electrical resistance|resistance]] which includes the loss resistance. Loss resistance results in heat generation rather than radiation, thus reducing efficiency. Mathematically, efficiency is equal to the radiation resistance divided by total resistance (real part) of the feed-point impedance.
| |
| Efficiency is defined as the ratio of the power that is radiated to the total power used by the antenna; Total power = power radiated + power loss.
| |
| | |
| ::<math> \tilde{n} = \frac{P_r}{P_r+P_l} </math>
| |
| | |
| ===Bandwidth===
| |
| IEEE defines bandwidth as "The range of frequencies within which the performance of the antenna, with respect to some characteristic, conforms to a specified standard." <ref>"IEEE standard definitions of terms for antennas.," IEEE Std 145-1993 , pp. 6, 21 Jun 1993 [http://ieeexplore.ieee.org/servlet/opac?punumber=2785]</ref> In other words, bandwidth depends on the overall effectiveness of the antenna through a range of frequencies, so all of these parameters must be understood to fully characterize the bandwidth capabilities of an antenna. This definition may serve as a practical definition, however, in practice, bandwidth is typically determined by measuring a characteristic such as SWR or radiated power over the frequency range of interest. For example, the SWR bandwidth is typically determined by measuring the frequency range where the SWR is less than 2:1. Another frequently used value for determing bandwidth for resonant antennas is the -3dB Return Loss value.
| |
| | |
| ===Directivity===
| |
| Antenna [[directivity]] is the ratio of maximum radiation [[intensity (physics)|intensity]] (power per unit surface) radiated by the antenna in the maximum direction divided by the intensity radiated by a hypothetical [[isotropic antenna]] radiating the same total power as that antenna. For example, a hypothetical antenna which had a radiated pattern of a hemisphere (1/2 sphere) would have a directivity of 2. Directivity is a dimensionless ratio and may be expressed numerically or in [[decibel]]s (dB). Directivity is identical to the peak value of the [[directive gain]]; these values are specified without respect to antenna efficiency thus differing from the [[Antenna gain|power gain]] (or simply "gain") whose value ''is'' reduced by an antenna's [[Antenna efficiency|efficiency]].
| |
| | |
| === Gain ===
| |
| Gain as a parameter measures the directionality of a given antenna. An antenna with a low gain emits radiation in all directions equally, whereas a high-gain antenna will preferentially radiate in particular directions. Specifically, the '''Gain''' or '''Power gain''' of an antenna is defined as the ratio of the [[intensity (physics)|intensity]] (power per unit surface) radiated by the antenna in a given direction at an arbitrary distance divided by the intensity radiated at the same distance by an hypothetical [[isotropic antenna]]:
| |
| ::<math>G={\left({P \over S}\right)_{ant} \over \left({P \over S}\right)_{iso}}\,\!</math>
| |
| We write "hypothetical" because a perfect isotropic antenna cannot be constructed. Gain is a dimensionless number (without units).
| |
| | |
| The gain of an antenna is a passive phenomenon - power is not added by the antenna, but simply redistributed to provide more radiated power in a certain direction than would be transmitted by an isotropic antenna. If an antenna has a greater than one gain in some directions, it must have a less than one gain in other directions since energy is conserved by the antenna. An antenna designer must take into account the application for the antenna when determining the gain. High-gain antennas have the advantage of longer range and better signal quality, but must be aimed carefully in a particular direction. Low-gain antennas have shorter range, but the orientation of the antenna is inconsequential. For example, a dish antenna on a spacecraft is a high-gain device (must be pointed at the planet to be effective), while a typical [[WiFi]] antenna in a laptop computer is low-gain (as long as the base station is within range, the antenna can be in an any orientation in space).
| |
| | |
| As an example, consider an antenna that radiates an electromagnetic wave whose electrical field has an amplitude <math>\scriptstyle{E_\theta}</math> at a distance <math>\scriptstyle{r}</math>. This amplitude is given by:
| |
| :: <math>E_\theta= {AI \over r}</math>
| |
| where:
| |
| * <math>\scriptstyle{I}</math> is the current fed to the antenna and
| |
| * <math>\scriptstyle{A}</math> is a constant characteristic of each antenna.
| |
| | |
| For a large distance <math>\scriptstyle{r}</math>. The radiated wave can be considered locally as a plane wave. The intensity of an electromagnetic plane wave is:
| |
| :: <math>{P\over S}={c\varepsilon_\circ\over2}{E_\theta}^2={1\over 2} {{E_\theta}^2\over Z_\circ}\,\!</math>
| |
| where
| |
| <math> \scriptstyle{Z_\circ=\sqrt{{\mu_\circ \over \varepsilon_\circ}}= 376.730313461\, \Omega}\,\!</math> is a universal constant called [[vacuum impedance]].
| |
| and
| |
| :: <math>\left({P\over S}\right)_{ant}={1\over 2Z_\circ} {A^2I^2\over r^2}\,\!</math>
| |
| If the resistive part of the series impedance of the antenna is <math>\scriptstyle{R_s}</math>, the power fed to the antenna is <math>\scriptstyle{{1\over 2}R_sI^2}</math>. The intensity of an isotropic antenna is the power so fed divided by the surface of the sphere of radius <math>\scriptstyle{r}</math>:
| |
| : <math>\left({P \over S}\right)_{iso}={{1\over 2}R_sI^2 \over 4\pi r^2 }\,\!</math>
| |
| The directive gain is:
| |
| ::<math>G={{1\over 2Z_\circ} {A^2I^2\over r^2} \over {{1\over 2}R_sI^2 \over 4\pi r^2 } } ={A^2 \over 30 R_s}\,\!</math>
| |
| | |
| For the commonly utilized [[Dipole antenna#Half-wave dipole|half-wave dipole]], the particular formulation works out to the following, including its [[Decibels|decibel]] equivalency, expressed as '''dBi''' (decibels referenced to '''i'''sotropic radiator):
| |
| | |
| <math>\begin{align}R_{\frac{\lambda}{2}}
| |
| &=60\operatorname{Cin}(2\pi)=60\left[\ln(2\pi\gamma)-\operatorname{Ci}(2\pi)\right]=120\int_{0}^{\frac{\pi}{2}}\frac{\cos\left(\frac{\pi}{2}\cos\theta\right)^2}{\sin\theta}d\theta,\\
| |
| &=15\left[2\pi^2-\frac{1}{3}\pi^4+\frac{4}{135}\pi^6-\frac{1}{630}\pi^8+\frac{4}{70875}\pi^{10}\ldots-(-1)^n\frac{(2\pi)^{2n}}{n(2n)!}\right],\\
| |
| &=73.1296\ldots\;\Omega;
| |
| \end{align}\,\!</math><!-- 73.12960179171673235432131024310052433236972993... -->
| |
| :::<small>''(In most cases '''73.13''', is adequate)''</small>
| |
| | |
| ::::<math>\begin{align}G_{\frac{\lambda}{2}}
| |
| &=\frac{60^2}{30R_{\frac{\lambda}{2}}}=\frac{3600}{30R_{\frac{\lambda}{2}}}=\frac{120}{R_{\frac{\lambda}{2}}}=\frac{1}{{}^{\int_{0}^{\frac{\pi}{2}}\frac{\cos\left(\frac{\pi}{2}\cos\theta\right)^2}{\sin\theta}d\theta}},\\
| |
| &\approx\frac{120}{73.1296}\approx 1.6409224\approx 2.15088\ \,\mathrm{dBi};\end{align}\,\!</math>
| |
| ::::<small>''(Likewise, '''1.64''' and '''2.15 dBi''' are usually the cited values)''</small>
| |
| | |
| Sometimes, the half-wave dipole is taken as a reference instead of the isotropic radiator. The gain is then given in '''dBd''' (decibels over '''d'''ipole):
| |
| :: '''0 dBd = 2.15 dBi'''
| |
| | |
| == Physical background ==
| |
| | |
| [[Image:radiation1.png|right|frame|The measured electrical field was radiated <math>\scriptstyle{r'\over c}</math> seconds earlier.]] | |
| The [[electrical field]] created by an electric charge <math>\scriptstyle{q}</math> is
| |
| ::<math>\vec E={-q\over 4\pi \varepsilon_\circ}\left[{\vec e_{r'}\over r'^2}+ | |
| {r'\over c}{d\ \over dt}\left({\vec e_{r'}\over r'^2}\right) +
| |
| {1\over c^2}{d^2\ \over dt^2}\left(\vec e_{r'}\right)\right]\, </math>
| |
| where:
| |
| * <math>\scriptstyle{c}</math> is the [[speed of light]] in vacuum.
| |
| * <math>\scriptstyle{\varepsilon_\circ }</math> is the [[Permittivity#Vacuum permittivity|permittivity of free space]].
| |
| * <math>\scriptstyle{r'}</math> is the distance from the observation point (the place where <math>\scriptstyle{\vec E}</math> is evaluated) to the point where the charge ''was'' <math>\scriptstyle{r'\over c}</math> seconds ''before'' the time when the measure is done.
| |
| * <math>\textstyle{\vec e_{r'}}</math> is the unit vector directed from the observation point (the place where <math>\scriptstyle{\vec E}</math> is evaluated) to the point where the charge ''was'' <math>\scriptstyle{r'\over c}</math> seconds ''before'' the time when the measure is done.
| |
| | |
| The "prime" in this formula appears because the electromagnetic signal travels at the [[speed of light]]. Signals are observed as coming from the point where they were emitted and not from the point where the emitter is at the time of observation. The stars that we see in the sky are no longer where we see them. We will see their current position years in the future; some of the stars that we see today no longer exist.
| |
| | |
| The first term in the formula is just the electrostatic field with [[retarded time]].
| |
| | |
| The second term is '' as though nature were trying to allow for the fact that the effect is retarded'' (Feynman).
| |
| | |
| The third term is the only term that accounts for the far field of antennas.
| |
| | |
| The two first terms are proportional to <math>\textstyle{1\over r^2}</math>. Only the third is proportional to <math>\textstyle{1\over r}</math>.
| |
| | |
| Near the antenna, all the terms are important. However, if the distance is large enough, the first two terms become negligible and only the third remains:
| |
| ::<math>\vec E={-q\over 4\pi \varepsilon c^2_\circ}{d^2\ \over dt^2}\left(\vec e_{r'}\right)=-q10^{-7}{d^2\ \over dt^2}\left(\vec e_{r'}\right)\, </math>
| |
| [[Image:Rediation2.png|right|frame|Electrical field radiated by an element of current. The element of current, the electrical field vector <math>\scriptstyle{\vec E_\theta}</math> and <math>\textstyle{r}</math> are on the same plane.]]
| |
| | |
| If the charge ''q'' is in sinusoidal motion with amplitude
| |
| <math>\scriptstyle{\ell_\circ}</math> and pulsation <math>\scriptstyle{\omega}</math> the power radiated by the charge is:
| |
| :: <math>P= {q^2\omega^4\ell_\circ^2 \over 12\pi\varepsilon_\circ c^3}</math> watts.
| |
| Note that the radiated power is proportional to the fourth power of the frequency. It is far easier to radiate at high frequencies than at low frequencies. If the motion of charges is due to currents, it can be shown that the (small) electrical field radiated by a small length <math>\scriptstyle{d\ell}</math> of a conductor carrying a time varying current <math>\scriptstyle{I}</math> is
| |
| ::<math>dE_\theta(t+\textstyle{r\over c})=\displaystyle{-d\ell \sin\theta \over 4\pi\varepsilon_\circ c^2 r}{dI\over dt}\,</math>
| |
| The left side of this equation is the electrical field of the electromagnetic wave radiated by a small length of conductor. The index <math>\scriptstyle{\theta}</math> reminds that the field is perpendicular to the line to the source. The <math>\scriptstyle{t+{r\over c}}</math> reminds that this is the field observed <math>\scriptstyle{{r\over c}}</math> seconds after the evaluation on the current derivative. The angle <math>\scriptstyle{\theta}</math> is the angle between the direction of the current and the direction to the point where the field is measured.
| |
| | |
| The electrical field and the radiated power are maximal in the plane perpendicular to the current element. They are zero in the direction of the current.
| |
| | |
| Only time-varying currents radiate electromagnetic power.
| |
| | |
| If the current is sinusoidal, it can be written in complex form, in the same way used for impedances. Only the real part is physically meaningful:
| |
| ::<math>I=I_\circ e^{j\omega t}</math>
| |
| where:
| |
| * <math>\scriptstyle{I_\circ}</math> is the amplitude of the current.
| |
| * <math>\scriptstyle{{\omega = 2\pi f}}</math> is the angular frequency.
| |
| *<math>\scriptstyle{j = \sqrt{-1}}</math>
| |
| The (small) electric field of the electromagnetic wave radiated by an element of current is:
| |
| ::<math>dE_\theta(t+\textstyle{{r\over c}})=\displaystyle{-d\ell j\omega \over 4\pi\varepsilon_\circ c^2} {\sin\theta \over r} e^{j\omega t}\,</math>
| |
| And for the time <math>\textstyle{t}\,</math>:
| |
| ::<math>dE_\theta(t)={-d\ell j\omega \over 4\pi\varepsilon_\circ c^2} {\sin\theta \over r} e^{j\left(\omega t-{\omega\over c}r\right)}\,</math>
| |
| The electric field of the electromagnetic wave radiated by an antenna formed by wires is the sum of all the electric fields radiated by all the small elements of current. This addition is complicated by the fact that the direction and phase of each of the electric fields are, in general, different.
| |
| | |
| == Calculation of antenna parameters in reception ==
| |
| | |
| The gain in any given direction and the impedance at a given [[frequency]] are the same when the antenna is used in transmission or in reception.
| |
| | |
| The electric field of an electromagnetic wave induces a small [[voltage]] in each small segment in all electric conductors. The induced voltage depends on the electrical field and the conductor length. The voltage depends also on the relative orientation of the segment and the electrical field.
| |
| | |
| Each small voltage induces a current and these currents circulate through a small part of the antenna [[Electrical impedance|impedance]]. The result of all those currents and tensions is far from immediate. However, using the [[reciprocity (electromagnetism)|reciprocity theorem]], it is possible to prove that the Thévenin [[equivalent circuit]] of a receiving antenna is:
| |
| | |
| [[Image:Equiv-receiv-antenna.jpg|left|Equivalent circuit of a receiving antenna.]]
| |
| | |
| <math>V_a={\sqrt{R_aG_a}\,\lambda\cos\psi\over\sqrt{\pi Z_\circ}}E_b</math>
| |
| | |
| *<math>\scriptstyle{V_a}</math> is the Thévenin equivalent circuit tension.
| |
| *<math>\scriptstyle{Z_a}</math> is the Thévenin equivalent circuit impedance and is the same as the antenna impedance.
| |
| *<math>\scriptstyle{R_a}</math> is the series resistive part of the antenna impedance <math>\scriptstyle{Z_a}\,</math>.
| |
| *<math>\scriptstyle{G_a}</math> is the directive gain of the antenna (the same as in emission) in the direction of arrival of electromagnetic waves.
| |
| *<math>\scriptstyle{\lambda}</math> is the wavelength.
| |
| *<math>\scriptstyle{E_b}</math> is the magnitude of the electrical field of the incoming electromagnetic wave.
| |
| *<math>\scriptstyle{\psi}</math> is the angle of misalignment of the electrical field of the incoming wave with the antenna. For a [[dipole antenna]], the maximum induced voltage is obtained when the electrical field is parallel to the dipole. If this is not the case and they are misaligned by an angle <math>\scriptstyle{\psi}</math>, the induced voltage will be multiplied by <math>\scriptstyle{\cos\psi}</math>.
| |
| * <math> \scriptstyle{Z_\circ=\sqrt{{\mu_\circ \over \varepsilon_\circ}}= 376.730313461\ \Omega}</math> is a universal constant called [[vacuum impedance]] or impedance of free space.
| |
| | |
| The equivalent circuit and the formula at right are valid for any type of antenna. It can be as well a [[dipole antenna]], a [[loop antenna]], a [[parabolic antenna]], or an [[antenna array (electromagnetic)|antenna array]].
| |
| | |
| From this formula, it is easy to prove the following definitions:
| |
| | |
| :: '''Antenna effective length'''<math> = \displaystyle{{{\sqrt{R_aG_a}\lambda\cos\psi\over\sqrt{\pi Z_\circ}}}} \,</math>
| |
| is the length which, multiplied by the electrical field of the received wave, give the voltage of the Thévenin equivalent antenna circuit.
| |
| | |
| :: '''Maximum available power'''<math>=\displaystyle{{G_a\lambda^2\over 4\pi Z_\circ}E_b^2} \,</math>
| |
| is the maximum power that an antenna can extract from the incoming electromagnetic wave.
| |
| | |
| ::''' Cross section''' or '''effective capture surface'''<math> = \displaystyle{{G_a\over4\pi}\lambda^2} \,</math>
| |
| is the surface which multiplied by the power per unit surface of the incoming wave, gives the maximum available power.
| |
| | |
| The maximum power that an antenna can extract from the electromagnetic field depends only on the gain of the antenna and the squared wavelength <math>\scriptstyle{\lambda}</math>. It does not depend on the antenna dimensions.
| |
| | |
| Using the equivalent circuit, it can be shown that the maximum power is absorbed by the antenna when it is terminated with a load matched to the antenna input impedance. This also implies that under matched conditions, the amount of power re-radiated by the receiving antenna is equal to that absorbed.
| |
| | |
| ==See also ==
| |
| * [[Free space]]
| |
| * [[Impedance of free space]]
| |
| * [[Near and far field]]
| |
| | |
| ==References==
| |
| {{reflist}}
| |
| | |
| ==External links==
| |
| *[http://deserthail.com/ RadioWORKS] A radio wave propagation and antenna length calculator
| |
| *[http://www.emscan.com/rfxpert/index.cfm RFxpert] Antenna measurement tool
| |
| *{{Citation |last=Brown |first=F. W. |title=How to Measure Antenna Gain |date=November 1964 |journal=CQ |publisher= |issn= |volume= |issue= |pages=40–??? |doi= }}
| |
| | |
| {{DEFAULTSORT:Antenna Measurement}}
| |
| [[Category:Antennas (radio)]]
| |